Does any one know how to hook Projector up to NTSC cable tv

New member

Username: Ochic

Post Number: 1
Registered: Jul-07

Posted on Sunday, July 15, 2007 - 07:53 GMT

hi I am about to buy a projector, I also want it to have NTSC cable tv on it though. I am currently looking for TV tuners on ebay, but I would like to know how to hook it up first. And all my suplies I have is the projector, a TV tunere, and the little cord comming out of my wall for cable.

here is some info on my projector I am getting soon:

Display Type: .55" dia DMD DLP technology
Native Resolution: XGA 1024 x 768
Brightness (ANSI lumens): 2,500
Contrast Ratio: Up to 2000:1
1.2x manual zoom/manual focus
RGB: 2x D-sub 15-pin component video
Video: 1x RCA for composite video, 1x S-Video
RGB audio: 1x stereo mini-jack
Video audio: 2x RCA jacks (L/R)
Built-in 1W speaker
Dimensions: 11.2" x 10" x 3.8"
Weight: 6.6 lbs.

Bob Bakshi

Bronze Member

Username: Lion_cing

Post Number: 35
Registered: Sep-06

Posted on Tuesday, February 16, 2010 - 06:54 GMT

Get a VCR with Tuner capability, you don't need seperate tuner, Connect to the wall. Then connect to the Projector (has speaker for sound). you may use any way you want. RCA: Yellow (picture) Red and whiter (sound) or S-Video (has both pucture and sound). Tune the Receiver to any chanel that you want which works. and that's it

Add Your Message Here

Does any one know how to hook Projector up to NTSC cable tv

Add Your Message Here

Forum Help

About Us

Forum News

Company Info

Follow Us

carter Ochi New member Username: Ochic Post Number: 1 Registered: Jul-07	Posted on Sunday, July 15, 2007 - 07:53 GMT hi I am about to buy a projector, I also want it to have NTSC cable tv on it though. I am currently looking for TV tuners on ebay, but I would like to know how to hook it up first. And all my suplies I have is the projector, a TV tunere, and the little cord comming out of my wall for cable. here is some info on my projector I am getting soon: Display Type: .55" dia DMD DLP technology Native Resolution: XGA 1024 x 768 Brightness (ANSI lumens): 2,500 Contrast Ratio: Up to 2000:1 1.2x manual zoom/manual focus RGB: 2x D-sub 15-pin component video Video: 1x RCA for composite video, 1x S-Video RGB audio: 1x stereo mini-jack Video audio: 2x RCA jacks (L/R) Built-in 1W speaker Dimensions: 11.2" x 10" x 3.8" Weight: 6.6 lbs.

Bob Bakshi Bronze Member Username: Lion_cing Post Number: 35 Registered: Sep-06	Posted on Tuesday, February 16, 2010 - 06:54 GMT Get a VCR with Tuner capability, you don't need seperate tuner, Connect to the wall. Then connect to the Projector (has speaker for sound). you may use any way you want. RCA: Yellow (picture) Red and whiter (sound) or S-Video (has both pucture and sound). Tune the Receiver to any chanel that you want which works. and that's it