New member Username: Gatorrob86
Post Number: 3
Registered: Feb-08
|
Posted on Wednesday, May 04, 2011 - 00:51 GMT The Polk Audio RM6750 speaker manual says: "Set the crossover frequency on the receiver to 120Hz". The Pioneer VSX-1020-K only has settings of 100Hz and 150Hz. Which should I choose? |
Gold Member Username: John_s
Columbus,
Ohio
US
Post Number: 2802
Registered: Feb-04
|
Posted on Thursday, May 05, 2011 - 12:36 GMT Bob, it is my understanding that Pioneer's proprietary auto MCACC setup protocol will set the proper crossover automatically. If you are still directed to set a crossover point manually, then choose 150 Hz. |
