Subwoofer/Receiver Crossover Settings

 

mike
I have a Denon AVR-1803 matched with Energy Take 5 sat/sub system. The receiver allows me to set my crossover point at 80/100/110. My sub has a variable crossover anywhere up to 100Hz. However, my take 5 satellites can only go down to 90Hz. Normally, I would set my sub and receiver crossover at about 80hz but if I do that then would I be losing those 8Hz from 81-89. Or would I even notice this small a loss? I could set my sub crossover at 90hz and my receiver at 100hz but then there is an overlap there. My other option is to set my sub and receiver crossover both at 100hz but I want to get the full range out of my satelites.....I'm confused....somebody please help me?
 

Derek
I have the same setup. Set them to 100.
 

timn8ter
Yep, skip the XO in the receiver and set the sub at 100.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us