Technic 1200 Ground Wire fix.

 

New member
Username: Deploy

Post Number: 1
Registered: Dec-06
Hello everyone.

I recently broke the "U" shaped plug of the ground wire that connects to the back of mixer. Ground wire still works, but I want to be able to put that piece back together. Would super glue or some of the sort work just fine? Just curious. Sorry for the newbie question.
 

Platinum Member
Username: Project6

Post Number: 11713
Registered: Dec-03
Just go to Radio Shack and get another "U" connector. You can just crimp it on the ground wire. Don't use superglue, it is not an effective conductor.
 

New member
Username: Deploy

Post Number: 2
Registered: Dec-06
Thanks for the reply Berny.
 

Gold Member
Username: Jan_b_vigne

Dallas, TX

Post Number: 9426
Registered: May-04
.

Do nothing. The spade lug is for convenience only and is not needed for a good connection. A bare wire connection is better than anything else and far better than a poor spade lug connection.

.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us