NAD Amp 304 Power Problem

 

New member
Username: Hehehaha

Post Number: 2
Registered: Aug-06
The power of the amplifier does not turn green after the red light. It cannot work. Does anybody knows how to resolve it?
 

New member
Username: Nickclev

Post Number: 1
Registered: Dec-06
Hi Edwin
Saw your post here about the red light on your amp. I have a similar situation on my NAD amp and it switches off and light turns red. What was the problem and was it easily fixed
Thanks
Nick
 

Gold Member
Username: Nuck

Post Number: 4730
Registered: Dec-04
With the speaker leads removed, is the result the same? Exactly?
 

Gold Member
Username: Nuck

Post Number: 4731
Registered: Dec-04
Addendum...in tightening the output lugs, could you have turned a base of one(or both), invoking a short shut-down?
 

New member
Username: Nickclev

Post Number: 2
Registered: Dec-06
Hey Nuck
I took the speaker cables out as you said and guess what, amp worked okay, so I put speaker cables back in and you know what again, I did not have the shutoff. Maybe the wires were touching each other or the other input but thanks so much for your help. You look like you solved my problem.
Thanks again
Nick
 

New member
Username: Nickclev

Post Number: 3
Registered: Dec-06
Hey Nuck
I took the speaker cables out as you said and guess what, amp worked okay, so I put speaker cables back in and you know what again, I did not have the shutoff. Maybe the wires were touching each other or the other input but thanks so much for your help. You look like you solved my problem.
Thanks again
Nick
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us