Forgot to remove the bi-wire jumper

 

New member
Username: Petro

Post Number: 1
Registered: Mar-05
I used my speakers now for 3 month in a bi-wire configuration....but with the jumpers on (did not notice the small ink in the manual urging to remove the jumpers before bi-wiring}. Did I damage the speakers? did not notice any difference after removing the jumpers. thanks
 

Silver Member
Username: Frank_abela

Berkshire UK

Post Number: 398
Registered: Sep-04
It's unlikely that you have damaged the speakers. Interesting that you didn't notice a difference when you removed the links - you should have noticed some difference (good or bad).

So long as the system is working fine, the amp isn't overheating and the sound is not distorting, then there should be no problem.

regards,
Frank.
 

New member
Username: Petro

Post Number: 2
Registered: Mar-05
Thank you Frank. I will do some more careful listening to try and pick-up differences. initially, i was only worried i damaged the speakers.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us