Like

Dolby Digital 5.1

 

New member
Username: Starnrg

Post Number: 1
Registered: Jan-05
HI there ok my problem is dolby digital 5.1 will not show up on my receiver i select 5.1 on the dvd and all i get it is linear PCM and pro logic 2 when select dts 5.1 on the dvd my receiver picks that up and works fine . I use optical
 

New member
Username: Starnrg

Post Number: 2
Registered: Jan-05
do you thin it might be my dvd player cause when i run digital cable the dolby 5.1 works fine
 

New member
Username: Starnrg

Post Number: 2
Registered: Jan-05
do you thin it might be my dvd player cause when i run digital cable the dolby 5.1 works fine
 

Bronze Member
Username: Mystro

Post Number: 25
Registered: Jan-05
Some DVD players and recievers have to be set on what type of digital input/output. Coax digital output is normaly the default setting. You might have to change the setting in the amp so it is looking for a opitical to trigger the 5.1 mode. All else fails, try using a coax digital output and see if it detects the 5.1
 

Silver Member
Username: Kano

Post Number: 280
Registered: Oct-04
make sure in the DVD player's menus DTS and DD are set to "Bittstream", not "PCM"
 

New member
Username: Starnrg

Post Number: 3
Registered: Jan-05
ok thanks that was the problem it was set to 2ch/PCM i turned it too off/bittstream it was jsut the dd 5.1 that dont work with 2ch/pcm the dts worked when it was on
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us