|
New member Username: OldschoolchevyriderDetroit, Mi USA Post Number: 2 Registered: Oct-06 | I have 2 12 inch mtx 9500s in a sledgehammer box, and i am getting a mtx 8001D amp to run them. I dont think the amp has enough power to run them. What do you think about the amp and what amp would you use to power them. |
|
Gold Member Username: Dustin3Tigard, OR U.S. Post Number: 3728 Registered: Oct-05 | first of all, i would put those subs in a custom box, i hate the sledge boxes and i think they sound like (sh!t) and no, that amp only does 1000 i believ. i would get a much bigger amp. but also, i would get diff subs that arnt so power hungry. https://www.ecoustics.com/electronics/forum/car-audio/272724.html |
|
Silver Member Username: TonPost Number: 118 Registered: Jul-05 | the Mtx TA81001 you mean? that amp is 1500 wrms at 1 ohm and they are underratted, mine is 1958 wrms at 1 ohm. i've heard 2 12" 9500 in a custom made sledgehammer box power by an Mtx TA 81001 and it was very loud for that kind of car, an Mitsubishi Lancer. |
|
New member Username: OldschoolchevyriderDetroit, Mi USA Post Number: 3 Registered: Oct-06 | no it is the mtx mxa8001 |
|
Gold Member Username: Logan__tilleHamilton, Indiana United states Post Number: 1340 Registered: Feb-06 | whats the amp put out then? |
|
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 2642 Registered: Dec-05 | get an amp putting 2000w rms, i think they're dual 4 ohm so get a soundstream picasso 2000d... that would be good and kinda budget... if you're tight then get PA a 3000db or hifonics 2006d |
|
New member Username: OldschoolchevyriderDetroit, Mi USA Post Number: 4 Registered: Oct-06 | Here are the specs for the amp MTX 800-Watt RMS Mono-Channel Amplifier (MXA8001) 800-watt RMS mono-channel amplifier: Pushes out 800 watts RMS to a single 2-ohm subwoofer or 400 watts RMS to a single 4-ohm subwoofer. Crossover: The low-pass filter maximizes your system performance and creates clear, hard-hitting bass. MOSFET power supply: Your amplifier runs cooler and more efficiently, preserving the life of your amp. Speaker-level inputs: You can use this amp with your existing stereo, even if it doesn't have preamp outputs. Just connect the amp to your speaker outputs. Bass boost: The bass boost gives extra thump to your lows. Model: MXA8001 |
|
Gold Member Username: Logan__tilleHamilton, Indiana United states Post Number: 1352 Registered: Feb-06 | you need a bigger amp. |
|
Gold Member Username: Logan__tilleHamilton, Indiana United states Post Number: 1353 Registered: Feb-06 | whats the voice coil config of the subs? |
|
New member Username: OldschoolchevyriderDetroit, Mi USA Post Number: 5 Registered: Oct-06 | Here are the Specifications for the mtx 9500 Sensitivity: 84.7 dB RMS Power Range : 200-1000 Watts Peak Power Handling: 2000 Watts Impedance: Dual 4 Ohm Low Frequency response: 36.4 Hz High Frequency Response: 150 Hz Diameter: 12 Inch Features 12" subwoofer Dual 4-ohm Voice Coils Power range: 200-1000 watts RMS Sensitivity: 84.7 dB Frequency response: 36.4-150 Hz Top-mount depth: 9.737" Voice coil: 4.0" Magnet weight: 260oz |
|
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 2649 Registered: Dec-05 | check my post over there^^^^^^ |