Ideal subs

 

Silver Member
Username: Mixmastaspig

Okanagan, B.C Canada

Post Number: 173
Registered: Sep-05
K, so maybe SX's are out (another thread showed type a R beating an SX).
I want 2 12" subs that will get great SPL and a little SQ running off of 800x2 RMS @ 2ohm or 2000+ 2 ohm bridged, 1000x2 @ 1 ohm.

thanks
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 1357
Registered: Jul-05
what model of amp is that ?
 

Silver Member
Username: Mixmastaspig

Okanagan, B.C Canada

Post Number: 174
Registered: Sep-05
heres a link to a fourm about it,

https://www.ecoustics.com/electronics/forum/car-audio/161772.html

the Darkblue 1000.2
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 1363
Registered: Jul-05
I remember that .
Good u gave the amp's specs but there's alot of sub choices so u should post a budget ....
 

Silver Member
Username: Mixmastaspig

Okanagan, B.C Canada

Post Number: 176
Registered: Sep-05
$1000 MAX anything around 200-400 per sub
 

Gold Member
Username: James1115

Wilton, Ct

Post Number: 4083
Registered: Dec-04
800x2 I would run eclipse TI's or if you can find Ascendant Audio Avalanche's, also the Adire brahma mark 2's, and ID max's are good for that kind of power.
 

Silver Member
Username: Quickshot

Charlotte, North Carolina U.S.

Post Number: 306
Registered: Aug-05
I dont know were you heard that a type R can beat a SX in spl but you were wrongly informed..their is no way that a Type R can outperform a SX in SPL when both are powered correctly...i dont even want to know hear about it all depends on the install hell no, if the same effort was put into the install of the Type R as into the SX's it wouldnt even be a competition case closed
 

Silver Member
Username: Mixmastaspig

Okanagan, B.C Canada

Post Number: 181
Registered: Sep-05
its on some thread on here, same box Type R over powered and it hit higher...but I dont really care i want subs that can hit hard and loud with SQ in mind that can run off that amp
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 1375
Registered: Jul-05
Well i'd buy 2 12 JL w6 or 2 idmax - idk if u can get anything better than that ! .
 

Bronze Member
Username: Jakeyplaysbass

Post Number: 86
Registered: Jul-05
Alpine X's are pretty nice, have good sq and get pretty loud but they would not even be close in spl to 2 re sx's.

1 re mt?
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 1381
Registered: Jul-05
Oooops - just rereading my post

i meant to say 2 JL 12W7 & NOT JL 12w6 !!!!!!
 

Silver Member
Username: Quickshot

Charlotte, North Carolina U.S.

Post Number: 310
Registered: Aug-05
why would you buy 2 W7s...thats hella overkill price wise those things are too expensive especially when you can find an equal alternative for much less like a Ti
 

Silver Member
Username: Mixmastaspig

Okanagan, B.C Canada

Post Number: 183
Registered: Sep-05
How much are the W7s what are their specs made for SPL?
can I have a link!
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 1388
Registered: Jul-05
http://69.93.14.227/index.cfm?fuseaction=page.display&page_ID=14&category_ID=23&mfg_account_ID=46&sort=high&=Update+Selection
like the P3 model or the dreads ..
 

Silver Member
Username: Mixmastaspig

Okanagan, B.C Canada

Post Number: 184
Registered: Sep-05
Would the W7s beat the SX in terms of SPL and SQ? I am looking for somthing that is geared towards SPL, as I want to compete

http://mobile.jlaudio.com/products_enclosures.php?menu=1&prod_id=294

is that the BEST setup for the W7 as you can get? box and sub from the company?
 

Silver Member
Username: Mixmastaspig

Okanagan, B.C Canada

Post Number: 185
Registered: Sep-05
How are the W6s?

http://mobile.jlaudio.com/products_enclosures.php?menu=5&prod_id=309
 

Silver Member
Username: Mixmastaspig

Okanagan, B.C Canada

Post Number: 186
Registered: Sep-05
How are the W6s?
When it says FINAL impedance at 4 ohm does that mean it cannt be brought to 1 OHM?

http://mobile.jlaudio.com/products_enclosures.php?menu=5&prod_id=309
 

Silver Member
Username: Mixmastaspig

Okanagan, B.C Canada

Post Number: 187
Registered: Sep-05
One more thing I just read FINAL impedance is 4 ohms, does that mean it cannot be brought down to 1 ohm?
 

Silver Member
Username: Mixmastaspig

Okanagan, B.C Canada

Post Number: 188
Registered: Sep-05
**My comp was messing up sorry for all the posts**
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 1391
Registered: Jul-05
From what i've read posted on this forum the SX may get louderwith more SPL but JLw7 still is the better SQL factor .

I think u better get the SX instead as its seems like it would suit your needs more .
 

Silver Member
Username: Mixmastaspig

Okanagan, B.C Canada

Post Number: 189
Registered: Sep-05
K thanks for the help! So hopefully the RE sx will unload on the SPL!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us