Multiple Speaker Setup


i have VERY little idea of what everyhting is but want to set up a home Stereo System with approx 6-10 additional to stereo speakers would i use a 6.1 ch amp or what- please do not be to detailed as little understanding i have.

Gold Member
Username: Jan_b_vigne

Dallas, TX

Post Number: 3560
Registered: May-04

Let me make certain I understand the question correcly. Do you want to set up a system with a home theater utilizing 5.1 and then run additional speakers in other locations totalling another 3 to 5 pairs of remote speakers? Or do you want a stereo system with only two speakers and then run the additional 3 to 5 pairs of speakers in remote locations?


Uh... Just Lots Of Speakers... What Would I USe And How?

Unregistered guest
You'll need a speaker distribution block or selector box. Look through the Niles site linked below.

Here's another site with other manufacturers.

Hook up is simple. Two speakers wires from your amp feed the "Amp In" connectors on the box. Then each pair of speakers gets hooked up to its own set of connectors. How you configure this depends on how many pairs of speakers you have.

Unregistered guest
Uh... Just Lots Of Speakers...

Is your firstname perhaps Butthead?
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us