Unable to play DVD through zone 2 for NAD T773 setup through surround back speakers? Any ideas?

 

New member
Username: Jug

Post Number: 1
Registered: Mar-08
I have setup my zone 2 for T773 through the surround back speakers as advised on this forum. This works perfectly through the VCR setting, but will not play through the DVD? I assume its to do with my setup? Has anyone come across this? Any suggestions? Thanks
 

Gold Member
Username: Mike3

Wylie, Tx USA

Post Number: 1211
Registered: May-06
I suspect it is because zone 2 only accepts analog inputs. If you have an HDMI, digital coax, or optical input from your DVD try switching it to RCA inputs to your T773 then see if it plays in zone 2.

This recommendation is based on my zone 2 experience with my Denon.
 

New member
Username: Jug

Post Number: 2
Registered: Mar-08
It is connected by coax. That makes perfect sense. I will post again when I have tried this. Regards.
 

New member
Username: Jug

Post Number: 3
Registered: Mar-08
I have kept the coax cable connected and connected RCA audio in connectors to the DVD which operates the zone 2 perfectly. Cheers
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us