Zone 2 AMP recommendations

 

Bronze Member
Username: Kfree1966

Post Number: 17
Registered: Jan-06
Currently have an Arcam AVR 300 and want to drive a set of speakers with the Zone 2 output. The Zone 2 output provides line level. Need to get a low cost (sub $300) amp to drive the speakers. any recommendations
 

Gold Member
Username: Jan_b_vigne

Dallas, TX

Post Number: 8165
Registered: May-04


Audio Source. The advertisements for this amp appear on the forum with regularity. However, it depends on how many speakers you intend to drive with one amplifier and how you intend to make the connection between amp and speakers.


 

Gold Member
Username: Nuck

Post Number: 2029
Registered: Dec-04
Kevin, that is one heck of a nice receiver.
Doesn't the Zone 2 use the 6th and 7th channels as Zone 2?
Or maybe you are using all 7?
 

Silver Member
Username: Hawk

Highlands Ranch, CO USA

Post Number: 765
Registered: Dec-03
What speakers will you use in zone 2?
 

Bronze Member
Username: Kfree1966

Post Number: 18
Registered: Jan-06
Nuck, you were right. Read the book and did some fiddling around. I can use channel 6 & 7 for the second zone. The only issue is I have to dual connect my CD player. Digital connect for Zone 1 and Analog for Zone 2.

As for the Zone 2 speakers, there are 2 sets of KEF wall mounts and Boston Acoustics on deck.

I would have liked to run HT, but mrs. has to redecorate and has that on hold. Brought the receiver as a cheaper setup then the AV8/P7 combo.

Thanks,
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us