Amplifier Crossover vs Sub Crossover


New member
Username: Anthonyiosos

Post Number: 6
Registered: Apr-05
I currently have an Onkyo 601. The 601 allows me to adjust the crossover down to 60hz and up to 150hz. I have a Plk psw303(8inch sub that kicks a**) and it has the cross over adjustments as will.

I currently use the unfilted sub input wich bypasses the subs crossover and uses the amps crossover.

Wich crossover is better to use....or should I use both in the filted inputs??

And for movies is the preout best to use or go hi level inputs?

Bronze Member
Username: Blazer

Post Number: 46
Registered: Feb-04
the POLK website has some good info on your questions

Gold Member
Username: Paul_ohstbucks

Post Number: 1460
Registered: Jan-05

As a general rule, use the receiver crossover and disable the sub crossover switch. The sub crossover switch is only intended for use when the receiver processor isnt present.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us