Help with bare wire connection


New member
Username: Adoody

Post Number: 1
Registered: Feb-05
This may be a dumb question, but the back of my sterio only has spots for bare wire conectors. The speakers I have use a u-shaped connector. Is it as simple as cutting those off and stripping back the plastic to make the wires bare and plugging them in? I just want to be sure before I go and cut them off. Thanks!

J. Vigne
Unregistered guest

Your cable has a spade connector. If your amp has screw type connections, you can use the spade. If the amp has push type connectors, remove the spade.

« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us