|
Unregistered guest | i bought a Xtant A3001T amp of ebay and when i go to hook it up the red LED comes on but no sound i have xtant subs to so it should match up i tried the gain and still nothin any suggestions |
|
Silver Member Username: InsearchofbassPost Number: 416 Registered: Jun-04 | what ohm are your subwoofers and how many do you have? |
|
matt_the_great Unregistered guest | two 10" 4 ohms xtants |
|
Silver Member Username: InsearchofbassPost Number: 417 Registered: Jun-04 | that amp can only go bridged mono 4 ohm my bet is you are wired up wrong youd either get 2 ohm or 8 ohm bridge with them go here to see wiring diagram http://www.rockfordfosgate.com/rftech/wiringwizard.asp |
|
Silver Member Username: JmloughreyFarmington, CT Post Number: 291 Registered: Jul-04 | also check your ground....could be bad as well...grounds are a pain |