2 2 ohm svc sub wiring

 

New member
Username: Fordtaurusbass

Iowa United States

Post Number: 7
Registered: Jul-04
I have a 4 channel 1600 watt amp (4x400 rms) and two 1200 watt subs (600 rms) each the subs are 2 ohms each and have a svc. How should I wire these to the amp. The amp can run at 2, 4 or 8 ohm loads.
 

Silver Member
Username: Grmncrsnbr

VA

Post Number: 263
Registered: Jun-04
bridge 2 channels which should give you a 800w load by 2 channels. If this is what the amp puts out at 2 ohms bridged then wire them tot he speakers. Persoanlly I think it would be much easier to sell the amp and a 2 channel or mono one.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us