Like

Amp not recieving power.. solutions?

 

Silver Member
Username: Noob101

Taylorsville, Utah USA

Post Number: 225
Registered: Jul-07
Spent the entire day installing my speakers in my car and hooking up the amp and stuff.. Well once i had it all finished the amp wasn't receiving power and the green light wasn't coming on. So what are some things i should check to get this fixed?

(i'm pretty sure my ground is good, but i may try some different places if nothing else works.)
 

Gold Member
Username: Kaerfpl

Spencerport, NY USA

Post Number: 1025
Registered: Jun-06
1. Check REM Cable: Make sure it is connected to a "Switched" power supply.

2. Check Inline & Amplifier Fuses: Make sure no fuses have blown or are damaged.

3. Check Power Cable: Make sure all connections are tight and secure and that there are no exposed wires.

4. Check Negative Cable: Make sure it has a solid connection to bare metal.
 

Platinum Member
Username: Nd4spd18

Philadelphia, PA

Post Number: 11903
Registered: Jul-06
Should be easy to figure out with a DMM and a few minutes...
 

Silver Member
Username: Makinblak

Monroe/Monticello, La/Ar

Post Number: 633
Registered: Oct-10
Bare metal. NO PAINT!!
 

Silver Member
Username: Noob101

Taylorsville, Utah USA

Post Number: 226
Registered: Jul-07
Thanks solved the problem. It was dark outside and i thought the rem wire was connected but it was just sitting on top of the hole. ha. Thanks guys.
 

Gold Member
Username: Th3pwn3r

I compensate...

Post Number: 9783
Registered: Jul-06
Username says all. By the way if you're going to keep doing installs I suggest you buy either a digital multi meter or at the least, a test light
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us