Like

W7s

 

Bronze Member
Username: Basshead94

Centralia, Illinois United States

Post Number: 41
Registered: Sep-10
i got two 13.5 w7s and a t3000.1 amp how should i wire this setup up
 

Silver Member
Username: Lord_huggington

Ontario Canada

Post Number: 359
Registered: Oct-10
Google "subwoofer wiring diagram", and "wiring your subs: single voice coil" or "wiring your subs: dual voice coil".
 

Gold Member
Username: Livin_loud

MW2 Addict

Post Number: 3440
Registered: Jan-06
$20 says you don't have enough electrical upgrades to run that.
 

Gold Member
Username: Skdooley

Roanoke, VA Usa

Post Number: 1557
Registered: Oct-09
Wire each sub in series then run the pair parallel.
 

Silver Member
Username: Makinblak

Monroe/Monticello, La/Ar

Post Number: 575
Registered: Oct-10
They are 3 ohm right?
 

Gold Member
Username: Skdooley

Roanoke, VA Usa

Post Number: 1558
Registered: Oct-09
Dual 1.5 ohm.
 

Silver Member
Username: Perfectcircle

Naptown, Indy

Post Number: 294
Registered: Feb-10
You need to run them in parallel. amp would see 1.5 ohms. with that amp maybe around 2k watts. that would be about right. i am running 2 of those on my 2 wardens and they are huge power hogs. need to make sure your electrical is up to par or you will smoke that amp and possibly your subs from the voltage drop. they really pull a lot of power.
 

Silver Member
Username: Makinblak

Monroe/Monticello, La/Ar

Post Number: 588
Registered: Oct-10
What kinda wardens you got pike?
 

Silver Member
Username: Perfectcircle

Naptown, Indy

Post Number: 295
Registered: Feb-10
21"s they're nice, but going to switch up soon. Just bought a third soundstream xxx 18 and i'm going to go in that direction.
 

Bronze Member
Username: Basshead94

Centralia, Illinois United States

Post Number: 42
Registered: Sep-10
sorry for the latteee reply but they are dual 1.5s
and i have the big three upgrade and a 10 farad rockford cap but my internet is very slow and pictures are 10x slower could one of you possibly upload the diagram on here or send it to me in an email @ mitchellznae@ymail.com and i can check it on my fone
 

Gold Member
Username: Van_man

Boston South, MA

Post Number: 5466
Registered: Mar-06
Nice subs.

heres a link to jl subs wiring.http://mobile.jlaudio.com/support_pages.php?page_id=161


2 DVC drivers with Voice Coils in Series / Parallel = 1.5 ohm load. Your best bet.
Or
2 DVC drivers with Voice Coils in Parallel / Parallel = .38 ohm load if your feeling lucky.
 

Bronze Member
Username: Basshead94

Centralia, Illinois United States

Post Number: 43
Registered: Sep-10
im most likely puttin them in a cts
wat size box do i need
can anyone help with the dimensions
and wat size port i need
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us