Enclosure for SKD

Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5892 Registered: Oct-05	Posted on Wednesday, February 23, 2011 - 03:22 GMT finally gettting around to get the pics up... hopefully will ship out tomorrow depending on my schedule. Came out excellent.
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5893 Registered: Oct-05	Posted on Wednesday, February 23, 2011 - 03:24 GMT the light sucks since the last one was taken in my house.. you get the gist
deathoob Gold Member Username: Gcs8 Atlanta, Ga Post Number: 1950 Registered: Sep-09	Posted on Wednesday, February 23, 2011 - 04:01 GMT your socks don't match
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5894 Registered: Oct-05	Posted on Wednesday, February 23, 2011 - 04:02 GMT true..
SKD Gold Member Username: Skdooley Roanoke, VA Usa Post Number: 1525 Registered: Oct-09	Posted on Wednesday, February 23, 2011 - 11:28 GMT Looks good Dustin. Thanks buddy!
Troy Jones Gold Member Username: Tejcurrent Post Number: 2709 Registered: Apr-07	Posted on Wednesday, February 23, 2011 - 15:22 GMT What did you use on the port for paint other than the paint? It looks fantastic. Great job.
Makinblak Silver Member Username: Makinblak Monroe/Monticello, La/Ar Post Number: 421 Registered: Oct-10	Posted on Wednesday, February 23, 2011 - 17:56 GMT Yea port looks sweet. Question about KERFS: Is there a general rule about ...... 1. how many cuts to make for a particular angle 2. how thick your blade should be 3. how far apart the cuts should be ?? "your socks don't match" haha
Sean P Gold Member Username: Jbpitt Pittsburgh, Pa. Usa Post Number: 1121 Registered: Jul-09	Posted on Wednesday, February 23, 2011 - 22:34 GMT Very nice! Kerf ports just look sweet as hell to me. Seems like they look better in single sub setups too. Great job man
sean Platinum Member Username: Insearchofbass Post Number: 16647 Registered: Jun-04	Posted on Thursday, February 24, 2011 - 03:14 GMT nice job dustin
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5895 Registered: Oct-05	Posted on Saturday, February 26, 2011 - 01:33 GMT Was able to take some better pictures before I shipped it out...
Julian Gold Member Username: Wolf_hound Phoenix, AZ Post Number: 1354 Registered: Sep-05	Posted on Saturday, February 26, 2011 - 01:47 GMT Thats a bad azz enclosure, good job bassman.
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5896 Registered: Oct-05	Posted on Saturday, February 26, 2011 - 03:08 GMT Thanks man!
Street Legal Bronze Member Username: Streetlegal Post Number: 33 Registered: Nov-10	Posted on Saturday, February 26, 2011 - 04:56 GMT very nice !
Canaan Gold Member Username: Southernrebel Monroe, Louisiana Team Audible... Post Number: 8470 Registered: Mar-04	Posted on Saturday, February 26, 2011 - 05:33 GMT Turned out GREAT Dustin!!! What carpet glue did you use? Ever get around to getting a latex spray gun and using WoodWeld? I'm using the cheap Kobalt gun w/ the woodweld, and I gotta say, this tax-return season....that $35 gun has been getting a workout, lol. I have been through ~3gallons in the few weeks, no clogs, no problem I have been meaning to build a kerfed box for display, but can't find the time. I used the last half sheet of my MDF here at the shop tonite for a 2-DD1008 Chevy crewcab box. Didn't get out of the shop til after 8:30.....these 10 to 14hr days are killing me. Me and Nick are in the bay pretty much all day, and Cory get stuck up front w/ customers. I get Nick to help my rip MDF sheets down to size so I can build boxes after work. We have been pretty much booked solid for the last 5-6weeks. Nick rolled our last vehicle today out at 6:15 (we close at 5:30), then we got to work on the 2-8 box. Damit. I'm gonna need a vacation. And for those of you wondering about my FAILED SS gift to MS. I have talked to him, and hopefully cleaned things up. He sold/traded the vehicle my original give was ment to be installed in, so I'm working w/ him to make amends...and apologize to everyone here. Pretty sure my name is close to mud because of this, but I'm sorry. ...... ..... .... Dustin, sorry for the thread jack, but I started typing and couldn't stop. NIce enclosure, keep up the AMAZING work! I'm sure the buyer will be more than happy w/ your work.
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5897 Registered: Oct-05	Posted on Saturday, February 26, 2011 - 06:54 GMT Thanks guys! and canaan, im sure people will understand.
-Eric- Gold Member Username: Livin_loud MW2 Addict Post Number: 3404 Registered: Jan-06	Posted on Saturday, February 26, 2011 - 09:22 GMT sexy work, Dustin. wish i could piece together a box that well.. Canaan, you're still ok in my book. even though you're from Louisiana
jake Bronze Member Username: Mrmef Post Number: 57 Registered: Aug-10	Posted on Saturday, February 26, 2011 - 19:10 GMT awsome work man cant wait for mine
SKD Gold Member Username: Skdooley Roanoke, VA Usa Post Number: 1527 Registered: Oct-09	Posted on Saturday, February 26, 2011 - 21:41 GMT Did you get it shipped out? Can't wait to get the sub installed and see how this set up is going to sound.
M.S. Platinum Member Username: Nd4spd18 Philadelphia, PA Post Number: 11745 Registered: Jul-06	Posted on Saturday, February 26, 2011 - 22:25 GMT Wow that is a great looking box. I have just have to get a box from dustin for my new car. Dustin, where are you located?... I'm just wondering how terrible shipping would be. lol.
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5898 Registered: Oct-05	Posted on Sunday, February 27, 2011 - 03:01 GMT Yes, it got shipped out. M.S -- where are you located and how large of box?
M.S. Platinum Member Username: Nd4spd18 Philadelphia, PA Post Number: 11746 Registered: Jul-06	Posted on Sunday, February 27, 2011 - 04:35 GMT Probably for 2 12"s I don't think I can fit 15s in this car... I am near philadelphia pa. Still not exactly sure what I'm going with.
Zack Silver Member Username: Wackzirth88 K-town, Il U.S. Post Number: 452 Registered: May-09	Posted on Sunday, February 27, 2011 - 04:59 GMT Good work, that box looks so bad as$. Roughly how much would a single 12 box like this one run, like 2 cu ft after port and sub displacement(like .18 port disp.)
SKD Gold Member Username: Skdooley Roanoke, VA Usa Post Number: 1528 Registered: Oct-09	Posted on Sunday, February 27, 2011 - 12:40 GMT Dustin has great prices imo. It won't cost as much as you think.
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5899 Registered: Oct-05	Posted on Monday, February 28, 2011 - 20:15 GMT M.s -- shipping would be around $70. Could do one for you right around 230 shipped. A single 12 box would be right around 175 shipped with a kerfed port. Roughly.
M.S. Platinum Member Username: Nd4spd18 Philadelphia, PA Post Number: 11747 Registered: Jul-06	Posted on Monday, February 28, 2011 - 23:58 GMT Yea thats reasonable. I think I know who will be building my next box, if it's ported.
jake Bronze Member Username: Mrmef Post Number: 59 Registered: Aug-10	Posted on Tuesday, March 01, 2011 - 00:19 GMT dustin hows the design on my box coming?
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5900 Registered: Oct-05	Posted on Tuesday, March 01, 2011 - 02:06 GMT Jake, shoot me a quick email man
jake Bronze Member Username: Mrmef Post Number: 60 Registered: Aug-10	Posted on Tuesday, March 01, 2011 - 02:44 GMT just replyed to your message
deathoob Gold Member Username: Gcs8 Atlanta, Ga Post Number: 1954 Registered: Sep-09	Posted on Tuesday, March 01, 2011 - 04:01 GMT yah dustin's / bassman's work is all ways a - a+ work, even when i give him sh1t for little things no one else would care about in hopes it makes his work just that much better. he still gets a 99.89 in my book.
Sean P Gold Member Username: Jbpitt Pittsburgh, Pa. Usa Post Number: 1125 Registered: Jul-09	Posted on Tuesday, March 01, 2011 - 12:49 GMT Yea,your not going to find someone that makes enclosures this nice for that good of a price. Looks awsome man!
Bassman3 Gold Member Username: Dustin3 Box Designer & Builder...Dustin Post Number: 5901 Registered: Oct-05	Posted on Wednesday, March 02, 2011 - 18:54 GMT thanks fellas....
Jarred Bronze Member Username: Jarred Post Number: 45 Registered: Apr-10	Posted on Friday, March 04, 2011 - 19:29 GMT Hey bassman. I'm looking to get an Fi ssd18 and I was told your the man to go to for a box. Can you help me out and give me an estimate on how much it'd cost for one?
Kyle Longbrake Gold Member Username: Kyle_lowe Post Number: 1277 Registered: Apr-06	Posted on Friday, March 04, 2011 - 20:51 GMT you can contact him through his website http://www.dldesignz.com/

« Previous Thread Next Thread »

Enclosure for SKD

Main Forums

Forum Help

Follow Us