Silver Member Username: Domenico
Glendale,
AZ
USA
Post Number: 349
Registered: Apr-09
|
Posted on Two Sundown Z-15's
Ported : 2.75 - 3.25 cubes tuned to 30-35 Hz
Fo= 28.585 Hz
Sd= 83.000m M2
Krm= 6.988m Ohm
Erm= 0.927
Kxm= 133.190m H
Exm= 0.630
Vas= 105.275 L
Cms= 107.617 uM/N
Mms= 288.070 g
BL= 26.107 T·M
Qms= 5.000
Qes= 0.467
Qts= 0.427
------------------------------------------------------
How's this look?
box width: 49
box height: 18
box top depth: 19
box bottom depth: 19
wood thickness: 0.75
ssquare port height: 16.5
square port width: 5
square port length 1: 13.25
square port length 2: 7
total port length: 28.5
sqaure port diameter: 10.24901275
sqaure port area: 82.5
sqaure port volume internal: 2351.25
sqaure port displacement: 2365.875
box volume (Ft3): 6.568
box volume (In3): 11349.75
tuned freq (fb): 30.6575777988842 |
Gold Member Username: Basebalz13
Moneta,
Va
Usa
Post Number: 1973
Registered: Aug-07
|
Posted on its late right now, ill check the measurments in the morning when im awake  haha |
Gold Member Username: Hittin1
TEAM REVOLUTION,
La.
Lake Charles...
Post Number: 4222
Registered: May-07
|
Posted on you really need to double up the wood thickness.. At the very least double or triple the baffle. JMHO |
Silver Member Username: Domenico
Glendale,
AZ
USA
Post Number: 365
Registered: Apr-09
|
Posted on i didnt even take that into concideration mark.
other then the thickness hows it look?
basebalz13- haha alright bro. |
Gold Member Username: Basebalz13
Moneta,
Va
Usa
Post Number: 1976
Registered: Aug-07
|
Posted on Mark- i think just double baffling the front will be fine. try flush mounting looks goods and braces well
also with such a low tuning his port is going to be really long that will actually brace most of the inside. |
Silver Member Username: Domenico
BanginGMCUSA
Post Number: 370
Registered: Apr-09
|
Posted on okay, so double up the front and brace, other then that everything looks good? port is open enough etc etc etc |