|
New member Username: West_21Amarillo, Tx Post Number: 1 Registered: Nov-09 | I have a elemental desings amp, specs- elemental design Nine.1 Model Name : NINe.1 Amplifier RMS Power @ 12.5v : 1200W x 1 @ 1 Ohm 900W x 1 @ 2 Ohm 450W x 1 @ 4 Ohm Was pushing my 12" kicker L7, 750 watts rms 1500 peak. pounded good for couple of months. one day it started to make wierd sound at low volume. sound ok at high but that didnt last long. sub dont work and is stiff! anyone know the cause of this. is the amp too much power for the rms. sub was wired 2ohm to the 1ohm stable load! any suggestions? |
|
Gold Member Username: FrkkevinTeam DLSSuperNatural... Post Number: 7440 Registered: Nov-05 | your making no sense lol even at 900rms @ 2ohm it is over the limit for the l7 and at 1ohm .. its well over the limit.. if you know what your doing you might be fine over-powering that sub IF the enclosure is built to specs and it is a clean unclipped signal.. and you don't abuse the setup trying to make it do something it was not designed to do you have a nice amp.. time to get a nice sub |
|
New member Username: West_21Amarillo, Tx Post Number: 2 Registered: Nov-09 | lol, i got you. i just got a good deal on the sub from a friend and just plugged and played. mistake. wat sub best fits that amp? or subs? in your opinion. thx for response. |
|
Gold Member Username: FrkkevinTeam DLSSuperNatural... Post Number: 7442 Registered: Nov-05 | depends on the budget/goal |
|
New member Username: West_21Amarillo, Tx Post Number: 3 Registered: Nov-09 | money aint a thing really just time consuming. need to know wat setup would be good for the amp. dnt want to blow any more subs.lol |
|
Gold Member Username: FrkkevinTeam DLSSuperNatural... Post Number: 7444 Registered: Nov-05 | you need to post a budget and what you want.. sq/sql/spl we can suggest a sub that surely you will not be willing to pay for |
|
Gold Member Username: FrkkevinTeam DLSSuperNatural... Post Number: 7445 Registered: Nov-05 | also need to know vehicle.. what kind of box room you have.. 10s/12s/15s |
|
Gold Member Username: JoebruceTC Sounds/DLS Post Number: 2933 Registered: May-04 | "money aint a thing" lol everyone always says that! Ok big balla here get 4 of these http://icondealerservice.com/catalog/index.php?_a=viewProd&productId=25 |
|
New member Username: West_21Amarillo, Tx Post Number: 4 Registered: Nov-09 | srry. its a 2000 mazda tribute. daily driver. box room is 48"L 18" H 12s $$$150 to 200 per sub SQ |
|
New member Username: West_21Amarillo, Tx Post Number: 5 Registered: Nov-09 | haha good one twizt.. my bad. lmao. amp cant even handle that sucka. |
|
Gold Member Username: JoebruceTC Sounds/DLS Post Number: 2934 Registered: May-04 | No personal experience with these subs but I always heard great things about them http://www.sonicelectronix.com/item_12257_JBL+P1222.html 2 dual 2ohm wire it to a final 2ohm 450wrms per sub Or http://www.woofersetc.com/p2519/G5124--Boston-Acoustics-12"-450-Watt-Single-4Ohm-Subwoofer.htm ^Compared to JLw6 but a bit better |
|
Gold Member Username: JoebruceTC Sounds/DLS Post Number: 2935 Registered: May-04 | Actually these would be perfect! http://cgi.ebay.com/2-RESONANT-ENGINEERING-SE12-D4-SE12D4-SE-12D4-RE-AUDIO_W0QQi temZ200395207133QQcmdZViewItemQQptZCar_Subwoofers_Enclosures?hash=item2ea87c31dd |
|
Bronze Member Username: SkdooleyRoanoke, VA Usa Post Number: 40 Registered: Oct-09 | x2 on the Re SE's. Should be a great match. Did you have the gain set correctly on the amp? That could have been part of the problem for the blown sub. |
|
Gold Member Username: FrkkevinTeam DLSSuperNatural... Post Number: 7446 Registered: Nov-05 | x3 on the RE SEs.. I run them sealed in my SQ car |
|
New member Username: West_21Amarillo, Tx Post Number: 6 Registered: Nov-09 | RE NICE.. 2 them are good with that amp. how would it split the power.. dnt kno much bout this stuff |
|
New member Username: West_21Amarillo, Tx Post Number: 7 Registered: Nov-09 | prob not.. was no more than half way shawn |
|
Gold Member Username: Philly306If youre going to give... Post Number: 1474 Registered: Apr-07 | "sub was wired 2ohm to the 1ohm stable load!" Not trying to embarrass you but this is fucking priceless. |
|
New member Username: West_21Amarillo, Tx Post Number: 8 Registered: Nov-09 | are u sayin to get one of these or 2? will they not be underpowered.. |
|
New member Username: West_21Amarillo, Tx Post Number: 9 Registered: Nov-09 | yo my bad.. i didnt see the 1200( per pair) thx fellas!! helped me out alot.. |
|
Gold Member Username: FrkkevinTeam DLSSuperNatural... Post Number: 7447 Registered: Nov-05 | 600rms each.. you need two.. that amp will do 1300-1400rms @ 14.4v @ 1 ohm its a perfect match |
|
New member Username: West_21Amarillo, Tx Post Number: 10 Registered: Nov-09 | cool man. lotta help.. and i would use this diagram on top? http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qt y=2&woofer_imp=4 |
|
Bronze Member Username: West_21Amarillo, Tx Post Number: 11 Registered: Nov-09 | yo, other than them RE's, wat do ya think bout 2 10's cvx? 600 rms / sub. or are the RE better? and if so, in wat way???/ |
|
Gold Member Username: JoebruceTC Sounds/DLS Post Number: 2937 Registered: May-04 | RE > Keeker |