Channels

brian walker New member Username: Pkilla21 Post Number: 9 Registered: Jun-04	Posted on Tuesday, June 15, 2004 - 21:30 GMT Can two subs be plugged into one channel. I have two type R's and I'm thinking of getting a Xtant 600watt amp, but it only has one channel, don't I atleast need two??
Patrick Lorenz Silver Member Username: Pat_l Tucson, AZ USA Post Number: 247 Registered: Apr-04	Posted on Tuesday, June 15, 2004 - 21:36 GMT Yes, wire them in paralell. Take one set of wire and run it from the AMP to the 1st sub then take the next set of wire and go from the sub 1 to the sub 2 (make sure you got + and - right). Here is a diagram. You can do this only with the same subs. Looks like you got that! The independance (ohms) may be different for your subs and the voice coils could be different. http://www.rockfordfosgate.com/rftech/wiringwizard.asp?WoofQty=2+woofers&WoofImp =Single+Voice+Coil+-+8+ohms&image.x=8&image.y=12
Patrick Lorenz Silver Member Username: Pat_l Tucson, AZ USA Post Number: 249 Registered: Apr-04	Posted on Tuesday, June 15, 2004 - 22:47 GMT The link i provided didnt copy right but choose your info from the pull downs and youll see.