New member Username: Briggsp23Post Number: 2 Registered: Feb-09 | ok i have 3 cvr's and was runnin off a zx700.5 but it only put about 900 rms at it's best and that is not even pushing them to potential. and i just found a jl 1000/1 locally for $300 will i have any problems ? maby over powering ? |
Gold Member Username: Th3pwn3rI compensate... Post Number: 9236 Registered: Jul-06 | As long as you're careful with the gain and volume controls you'll be fine. Nobody forces you to turn it up to full blast. |
Diamond Member Username: BestmankindPost Number: 23243 Registered: Oct-05 | i used to power 2 cvrs with a 1000/1 and it was fine. like the $20 guy said, just becareful. |
New member Username: Briggsp23Post Number: 3 Registered: Feb-09 | any recomendations for the gains? |
Diamond Member Username: BestmankindPost Number: 23250 Registered: Oct-05 | yeah use a dmm when setting the gain. and no bass boost. |
Gold Member Username: Nd4spd18Philadelphia, PA Post Number: 9872 Registered: Jul-06 | http://mobile.jlaudio.com/support_pages.php?page_id=143 |
Silver Member Username: M0nstarToledo, OH U.S. Post Number: 158 Registered: Dec-08 | THAT WOULD BE A GREAT PRICE FOR A GOOD AMP THOUGH. it should have no problem pushing 3 of them. my brother used to have one pushing 2 15" L5s. it was wierd cuz ppl at the car audio shop were bedazzled at how loud it was being 1000w short.. |
Gold Member Username: Hittin1TEAM REVOLUTIONLake Charles... Post Number: 2569 Registered: May-07 | what size subs are the cvr's? |
New member Username: Briggsp23Post Number: 4 Registered: Feb-09 | 12 inch subs! and i read somethin about needing to disconect the ground when you are installing/uninstalling is that true ? or can i just plug and play? it's all stinger 4 gauge wiring |
Silver Member Username: M0nstarToledo, OH U.S. Post Number: 162 Registered: Dec-08 | you don't HAVE to. but i would reccommend it if you're a newbie. you disconnect the battery's (-) post. did you ever get that JL1000? |
New member Username: Briggsp23Post Number: 5 Registered: Feb-09 | yea i have it just gotta finish payin it off before i install... so diconnect directly from the battery and hook everything up and then simply re connect and turn the car on ? |
Gold Member Username: Snowball123West Allis, WI Post Number: 2286 Registered: Oct-07 | yeah, just disconnect the negative, make sure when its hanging loose, it doesnt get near the positive post. |
Gold Member Username: Nd4spd18Philadelphia, PA Post Number: 9902 Registered: Jul-06 | ALWAYS diconnect battery ground before working on anything electrical. Not doing so is how people blow up equipment. |
Silver Member Username: SnacksQuincy, Florida USA Post Number: 165 Registered: Jul-08 | yo chad, how were the 2cvrs on the 1000/1 when you had them? hit pretty good? ive got 2 and im trying to order a 1200rms amp this week as soon as the paycheck comes through. |
New member Username: Briggsp23Post Number: 6 Registered: Feb-09 | on youtube there was a guy running 3 cvr's off a 1000/1 and said he blew the subs or one of them any way! should that be a concern or just someone running there system to hard? |
New member Username: Briggsp23Post Number: 7 Registered: Feb-09 | ok so just hooked the 700.5 back up while i'm finish payin off the 1000/1 and it starts cuttin off at like volume 15 when i have the bass turned to about 10 of 15 on an alpine deck when it used to play fine at around 22-25 and the bass knob is only on half too! any suggestions as to what may be happening or what i could try to fix this |
New member Username: Briggsp23Post Number: 8 Registered: Feb-09 | can anyone help with the new problem? |
Silver Member Username: M0nstarToledo, OH U.S. Post Number: 186 Registered: Dec-08 | turn the amp down dumba** |
Gold Member Username: Hittin1TEAM REVOLUTIONLake Charles... Post Number: 2733 Registered: May-07 | Lucas, you are not in the position to call ANYONE on here a dumba**, dumba**! Our noobs(that would be you) need to respect our other noobs. You've asked some of the stupidest questions that I have seen to date, soooo be cool, bro! |