|
Unregistered guest | i have a bazooka el500.1 mono amp and 2 bazooka 12's i want to install them myself and have read all about installing systems but i dont understand how you wire the subs from the mono amp to two subs...help please... |
|
Bronze Member Username: JayjPost Number: 70 Registered: May-04 | Well are the subs SVC or DVC. And what ohms ratings do the coils have. |
|
A2 Unregistered guest | 4ohm |
|
Silver Member Username: Pat_lTucson, AZ USA Post Number: 231 Registered: Apr-04 | You wire them in parrellel to go from a mono AMP to 2 subs. |
|
A2 Unregistered guest | parralell? |
|
Bronze Member Username: JayjPost Number: 73 Registered: May-04 | A2 you need to wire it just like this option # 1. http://www.crutchfieldadvisor.com/ISEO-rgbtcspd/learningcenter/car/subwoofers_wi ring.html?subs=2&impedance=SVC4 |
|
A2 Unregistered guest | so then does your two subs just split the power coming from the amp equally or do your get double the power |
|
Bronze Member Username: JayjPost Number: 94 Registered: May-04 | Well when you wire a 2 ohm load the amp can double its power. Such as if it is 200 watts @ 4ohms then most of the time it will be 400 watts @ 2 ohm. Then it splits that power by 2 giving 200 watts per sub. |