Any experience ipod adapters?

 

Silver Member
Username: Cplaya280

Pennsylvania USA

Post Number: 973
Registered: Oct-05
Ok just got my pioneer ipod adapter CDib100ii in the mail i bought off of CA.com i opened it up and it's missing the black and yellow power supply wires that plug into the adapter. So is there anyways to still hook this up or is there a way i can just buy that part idk what to do.
 

Bronze Member
Username: Trueaudiophile

New York

Post Number: 21
Registered: Jul-08
make your own plug.
 

Silver Member
Username: Cplaya280

Pennsylvania USA

Post Number: 974
Registered: Oct-05
how am i suppose to make my own plug i have no idea
 

Silver Member
Username: Dj_007

Carlisle, KY US

Post Number: 105
Registered: Dec-06
if you take the box apart on the board in there where the plug should plug in ther is probably a + and a - just solder some wires to those solder points on the board...
 

Bronze Member
Username: Trueaudiophile

New York

Post Number: 22
Registered: Jul-08
just get something like in the picture below but a bit smaller. then stick it in.

like derek said, if you open the case it should tell you which one is power and ground.

if you wait a few hours then i can tell you which side is power and which side is ground. i just need to look at the one in my car.

Upload
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us