1501bd wiring

 

New member
Username: Cheetah

Marion , Iowa

Post Number: 1
Registered: Jun-04
i just bought this 1501bd rockford amp and have 2 hx2 power 10s dvc i belive they are 2(2) ohm what would be the best wiring seqence. Thanks
 

Bronze Member
Username: Davids2004

Houston, TX USA

Post Number: 62
Registered: Jun-04
http://rockfordfosgate.com/rftech/wiringwizard/2_2ohmDVC_2ohm.gif

The 2nd option.
 

New member
Username: Cheetah

Marion , Iowa

Post Number: 3
Registered: Jun-04
do you think i could run 4 of these off that amp?
 

Bronze Member
Username: Davids2004

Houston, TX USA

Post Number: 66
Registered: Jun-04
you could run 4 off of it but you would have it wired at 4 ohms instead of 2 ohms and you wouldnt even get those subs moving since they are 1000 rms. The only other option is 1 ohm and I dont believe that amp is stable down to 1 ohm. If you wanna run 4 step down to the regular hx2 and the dvc 4 ohm. Then you would get about 350 rms at least to each sub.
 

New member
Username: Cheetah

Marion , Iowa

Post Number: 6
Registered: Jun-04
I ALREADY HAVE THE SUBS. DO YOU THINK I SHOULD GET ANOTHER AMP OR TRY IT DOWN AT 1 OHM
 

Bronze Member
Username: Davids2004

Houston, TX USA

Post Number: 69
Registered: Jun-04
Well if you get another amp you will need two more subs. The hx2 are cheaper so I would sale those two subs you got and get 4 of the reg hx2. I wouldnt run that amp at 1 ohm myself.

Here you go.

2 Power HX2-150.00-200.00
BD1500-300.00-400.00

600.00 this way

Or

Sale Power HX2-150.00 a piece or more
That will give you at least 300.00

4 HX2-100.00 a piece=400.00.

100.00 this way.

So thats the deal there. Save money sale those subs and buy the 4 hx2.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us