Silver Member Username: Surferdude9371
Admiting your an a$$ho...
Post Number: 425
Registered: Mar-07
|
Posted on if the front bat is a 13v the back is only at 12v i know its norm to drop a couple tenths a volt but is this normal? |
Silver Member Username: Talon01
Team revolution ,
Pa
Usa
Post Number: 661
Registered: Jun-07
|
Posted on what size is the wire power and ground |
Silver Member Username: Surferdude9371
Admiting your an a$$ho...
Post Number: 426
Registered: Mar-07
|
Posted on 0 guage |
Silver Member Username: Talon01
Team revolution ,
Pa
Usa
Post Number: 662
Registered: Jun-07
|
Posted on normally with 1v drop its a ground issue, is your ground direct or chassis |
Gold Member Username: Nd4spd18
Northwest PA
Post Number: 5345
Registered: Jul-06
|
Posted on Running 2 different batteries can cause that, as well as other problems since they will not be exactly the same voltage |
Silver Member Username: Talon01
Team revolution ,
Pa
Usa
Post Number: 663
Registered: Jun-07
|
Posted on also true |
Silver Member Username: Surferdude9371
Admiting your an a$$ho...
Post Number: 428
Registered: Mar-07
|
Posted on chasis ground. i have 3 bats now and this was happening b4 the 3. i ran it just off the front bat and still dropped 1v in at the amp. |
Gold Member Username: Nd4spd18
Northwest PA
Post Number: 5348
Registered: Jul-06
|
Posted on That is a ground issue then. Running a 0 gauge ground wire from front to back batteries will fix it if thats the case. |
Silver Member Username: Surferdude9371
Admiting your an a$$ho...
Post Number: 429
Registered: Mar-07
|
Posted on ok thnx man |
Gold Member Username: Southernrebel
Monroe,
Louisiana
2 DD3515s, 2...
Post Number: 5806
Registered: Mar-04
|
Posted on Also, check your front fuse holder.
I have seen faulty fuse holders cause over 2V drops. (Bad connections) |
Silver Member Username: Surferdude9371
Admiting your an a$$ho...
Post Number: 431
Registered: Mar-07
|
Posted on thnx ill deff check that out first |
Gold Member Username: Nd4spd18
Northwest PA
Post Number: 5360
Registered: Jul-06
|
Posted on Obviously check all connections first...... any place you have a connection there is the possibility of it being bad. |