Silver Member Username: EvoixmrPost Number: 124 Registered: Aug-07 | I'm building a fiberglass box for 2 12's. I was wondering if I can build something where I could change out ports, and change it to seales when I wanted to as well? I've seen interchangable ports but would the ported enclousure be too big to make a cover to seal up the ported part of the box. Could I just make one of the interchange ports and seal up the end to take up space and shrink the enclosure. My enclosure will probably be 8" tall and 32" x 22". Will port shape and the short box affect porting? My port and subs will both be on angles does this matter. Is it neccessary to make individual chambers and ports for the subs, or can they use a commonn enclosure and one or two ports. Can someone post a link for a good port calculator I need all the help I can get, I'm tryin to get this right he first time. |
Silver Member Username: ImnothereimjustvisitingPost Number: 132 Registered: Aug-07 | http://www.carstereo.com/help2/Articles.cfm?id=31 |
Gold Member Username: Th3pwn3rPost Number:... Post Number: 4831 Registered: Jul-06 | I don't think I've seen a completely fiberglass enclosure that has had anything interchangeable.It would also be extremely difficult to pull off but you can try. |