now i have to set it up, the right way.. when i set the voltage from the calculation i need where do i do this? do i get the voltage from the speaker inputs? im looking for 36.4V. and do i have to take into consideration that my HU is putting out 4V?
there are also 3 settings on the amp as well 1-punch eq 2-FREQ eq 3-Gain 4-Crossover switch (LP,AP,HP)
what one do i start with when adjusting the output for the recommended voltage?
Not to sure how to set gain with a dmm, but you can start by setting the crossover switch to LP and your frequency to about 75. Check out the JL Audios's website for help with the gain or just google it. Good Luck!