|
New member Username: CrballerPost Number: 7 Registered: Aug-07 | Im going to buy a 12" alpine R either SWR-1242(4 ohms) or SWR-1222 (2 ohms). I'm wondering which is better for sound and which will blow more. Also which amp I should use for either one. Im thinking about using the Kenwood 9103D for the 4 ohm, maybe for the 2 ohm as well. Any thoughts? |
|
Silver Member Username: Big_edge_headMilwaukee, Wisconsin USA Post Number: 514 Registered: Mar-07 | the diff impedences will give you diff. wiring options. the dual 4 u can wire to 2 or 8, and the dual 2 u can wire to 1 or 4. if your running 2 subs then a dual 4 can go 1 and 4, and a dual 2 can do 2 or 8. |
|
New member Username: CrballerPost Number: 8 Registered: Aug-07 | so if im running just one sub what would be the best way to go? |
|
Gold Member Username: SouthernrebelMonroe, Louisiana 2 DD3515s, 1... Post Number: 5178 Registered: Mar-04 | I that is the amp you are stuck on... If you are planning to run 1 sub, get the dual 2ohm and wire it to 4ohm. If you are doing 2 subs, get the dual 4ohm and wire them to 1ohm. Or you could go w/ a different amp. |
|
Silver Member Username: Kpa2727Post Number: 562 Registered: May-07 | SWR-1242(4 ohms) i own this one heres my vids u decide. btw thts 600 rms and 1100 rms untuned on the 1100. http://www.youtube.com/watch?v=XzekJryotLE http://www.youtube.com/watch?v=fyDBOg17S10 |