Any help would be nice.


New member
Username: V3g4nre1ch

Post Number: 3
Registered: May-07
ok so first off i have an audiobahn a8002t powering 2 audiobahn aw1251se. i have the amp bridged and the voice coils wired in series, speakers wired in parallel putting a 4 ohm load on the amp. so i was driving and ever since i put them in i never had any problems other than the occasianl over heating on hot days. well out of no where the bass cuts out. i turn my cd player and amp off to let it cool, but when i turn it back on i get nothing but the protect light on the amp is on. i get home check it out and the 30 amp fuses are blown. i replace them and the amp comes right back on, but without bass. no bass comes through i turn every thing off check somemore, i turn it back on turn it up maybe mid way it goes to a very steady thumb every second or so. not real sure what to do. any help would be appreciated. thanks.

Gold Member
Username: Van_man

Boston South, MA

Post Number: 2765
Registered: Mar-06
check your ground? RCA wires, Rem, Power, and subs impedance on the amp.
Also post amp/sub specs . Makes it easier to help you.

New member
Username: V3g4nre1ch

Post Number: 4
Registered: May-07
checked ground power remote rca. the amp specs 200 watts x 2 chan. @ 4 ohms
400 watts x 2 chan. @ 2 ohms
*800 watts x 1 chan. @ 4 ohms Bridged*. i have it bridged. like i said both subs are 400 rms each.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us