|
Silver Member Username: ExplictxGlen Burnie, Maryland USA Post Number: 329 Registered: Mar-07 | Anyone know the cheapest place to get one. mine now only can handle 40 amp fuse so i need to upgrade. my fuse keeps blowing. |
|
Gold Member Username: Snarl2004Audioque 12 SD2.5s, Earthquake P... Post Number: 1605 Registered: Dec-06 | i bought my friend a 60 amp one at radio shack the other day it was for 8awg wire |
|
Silver Member Username: ExplictxGlen Burnie, Maryland USA Post Number: 330 Registered: Mar-07 | oh ok because my 40 amp blows after the second bass hit. |
|
Silver Member Username: RideredderCornell, IL USA Post Number: 939 Registered: Sep-05 | You're blowing 40 amp fuses with 8 guage wire? Sounds a little strange to me. What do you have this wire going to? |
|
Silver Member Username: ExplictxGlen Burnie, Maryland USA Post Number: 331 Registered: Mar-07 | a beat 1200w xploder amp, can i put a 60 or 80 amp maxi fuse on it? |
|
New member Username: Vivi2000Post Number: 4 Registered: Aug-07 | Your inline fuses's rating should be equal to or higher than the amps's fuse rating. So if it has a 60 amp fuse use a 60 or more. |
|
Silver Member Username: RideredderCornell, IL USA Post Number: 940 Registered: Sep-05 | Can you post a link to the specs of that amp? I can't find one. |
|
Silver Member Username: ExplictxGlen Burnie, Maryland USA Post Number: 332 Registered: Mar-07 | Response Bandwidth 5 - 50000 Hz Max Output Power / Channel Qty 400 Watts x 2 Continuous Power / Channel Qty 200 Watts x 2 Input Channel Qty 2 channel(s) Amplifier Output 2-channel Output Channel Qty 2 channel(s) High Level Inputs Yes Input Signal Voltage 0.3 - 6V Crossover Active crossover Crossover Slope 12 dB/octave Low Pass Frequencies 50 - 300 Hz Bass Boost Frequency 40 Hz Bass Boost Gain 0 to +10dB Output Power / Total 1200 Watt Amplifier Output Details 200 Watt - 4 Ohm - 20 - 20000 Hz - THD 0.1% - 2 channel(s) 215 Watt - 2 Ohm - 20 - 20000 Hz - THD 0.15% - 2 channel(s) 500 Watt - 4 Ohm - 20 - 20000 Hz - THD 0.1% - 1 channel(s) Additional Features Input level controls, gold plated connectors, thermal protection, short circuit protection |
|
Silver Member Username: RideredderCornell, IL USA Post Number: 941 Registered: Sep-05 | Ok, I never heard of a "beat xploder" before, so that was what I was looking for. You probably meant Sony Xplod. What sub(s) are you running on it? You aren't going to get more than 300rms bridged out of that amp. |
|
Silver Member Username: ExplictxGlen Burnie, Maryland USA Post Number: 333 Registered: Mar-07 | Yeah i ment Sony lol sorry about that. Im running 2 ED EHQS 12" off of it and it pushes them good and them subs take 200-250 watts im getting about 500w bridged. |
|
Silver Member Username: ExplictxGlen Burnie, Maryland USA Post Number: 334 Registered: Mar-07 | Oh and im upgrading the fuse holder lol, [IMG]http://i40.photobucket.com/albums/e215/jcoleman134/fuseholder.jpg[/IMG] |
