|
Silver Member Username: Theweasel2 12 FI SSD, Colorado U.S. of A Post Number: 990 Registered: Mar-06 | if i got a 4 channel amp would it be alright if i ran 2 channels at 4 ohms and the other 2 channels at 2 ohms? |
|
Gold Member Username: CarguyPost Number: 6436 Registered: Nov-04 | As long as you don't exceed the minimum ohm requirement of the amp, then yes. Usually, a 4 channel amp can handle 2ohm in stereo mode, and 4ohm in bridged mode. |
|
Silver Member Username: Theweasel2 12 FI SSD, Colorado U.S. of A Post Number: 991 Registered: Mar-06 | like with this amp, i could run 2 channels at 4 ohms to get 45w, and the other 2 channels at 2 ohms to get 90w? and how would i set the gains for the amp? |
|
Silver Member Username: Theweasel2 12 FI SSD, Colorado U.S. of A Post Number: 992 Registered: Mar-06 | whoops... forgot the link: http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=565 |
|
Gold Member Username: CarguyPost Number: 6437 Registered: Nov-04 | You set it the same way. 4 channel amps should come with 2 gain/level controls. Match it to your HU's output voltage. |