Big 3 Upgrade Help?

 

Bronze Member
Username: Vash3000

Post Number: 52
Registered: Nov-06
Okay i read a lot about the big 3 upgrade and even saw the video on ED website but still I got a few questions on it. Right now there are 2 wires on the negative of the battery. One if from the Battery negative to the chassis and the other from the Battery negative to the engine block. And One wire from Battery positive to the alternator. Can I just upgrade these 3 wires and it should be fine or do I need to add another one from the engine block to the chassis?
 

Gold Member
Username: Th3pwn3r

Post Number:...

Post Number: 4063
Registered: Jul-06
Upgrade from the batt pos to the alt with 1/0.Upgrade from the batt neg to chassis with 1/0.Upgrade from alt case or mount or somewhere on the block to chassis with 1/0.
 

Gold Member
Username: Nd4spd18

Southeast PA

Post Number: 3152
Registered: Jul-06
You can do what you said or what Rob said, either will work just fine.
 

Bronze Member
Username: Mark872

Post Number: 54
Registered: Jul-07
what about monster wire of 18ft on ebay for 48 bucks shipped?
 

Bronze Member
Username: Mark872

Post Number: 55
Registered: Jul-07
^^^hmm...dont know how i posted that here...sorry bout that
 

Silver Member
Username: Kklagge

San Diego

Post Number: 493
Registered: Dec-04
When you upgrade the wire from the alt case to chassis put it in the same place as the neg batt to chassis (a frame bolt works much better than someplace with only sheet metal).
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us