Wall Socket Fun! and First Recone!
|
Silver Member Username: LowdoseSt. Louis, Mo. USA Post Number: 182 Registered: Apr-05 | I made this a few days ago me and a buddy of mine I figured what the hell. We Was bored and I am waiting for the rest of my stuff to get in. I didn't blow it but gave it a good run before I dismantled it. I got it with 1 good coil and a recone. But when we hooked it to the wall outlet it was nuts man people came out their houses like wtf! It was funny s***. We put it in my car too for fun the kids across the street were scared of it lol. I just reconed it to my first go at it wasn't to bad. I tried to take as many pics before my camera died. Enjoy, First day (And yeah thats my goofy laugh I couldn't help it was crazy!) http://www.youtube.com/watch?v=EvsOlwtw6pM Second Day (Some Free Air Action!) http://www.youtube.com/watch?v=ae376_VeCVQ My Project  New cone in the wait.  CA Glue FTW!  My Homeboy hard at work getting that old glue off. While I smoke a cig.  Pic of the old coil after socket fun.  Nice fresh clean basket. And motor  Now I would have took shots of the former shims and all the CA gluing but I was laying the CA and the camera decided to cut off by the time I got batterys I had it down. But here is some other shots of the finished sub.  Spider  With rubber ring  And once I get some wire I can hook this biotch up. J.B. |
|
Silver Member Username: Kpa2727Post Number: 247 Registered: May-07 | i can't believe u never blew it fully , thats nuts. |
|
Gold Member Username: OglejustPost Number: 2162 Registered: Aug-06 | those r some crazy vids lol |
|
Silver Member Username: LowdoseSt. Louis, Mo. USA Post Number: 183 Registered: Apr-05 | I tried to blow it up but it was taking so long and my wife was naggin on me cause she was trying to watch TV  . The cops ended up strolling down the road after we was done too. |
|
Gold Member Username: SouthernrebelMonroe, Louisiana DD 9515d~~]... Post Number: 5054 Registered: Mar-04 | Please tell me you taped up the gap b4 you ground the glue off.... Takes alot to kill a DD9500...i burped the hell out of mine on the wall at 0.35ohm b4 i killed it. |
|
Silver Member Username: LowdoseSt. Louis, Mo. USA Post Number: 184 Registered: Apr-05 | The gap was sparkilin when I finished. So no worries I had some towel shoved down in there can't really see from the pic. the only place any got was at the top of the gap but made sure non got inside. And yes it takes alot to kill them this was only 2 days of fooling around there were 2 other sessions of fun besides the 2 I taped. J.B. |
|
Gold Member Username: AdddisorderWest palm, Florida Post Number: 4746 Registered: Jan-06 | that looks like fun. |
|
Silver Member Username: LowdoseSt. Louis, Mo. USA Post Number: 188 Registered: Apr-05 | It was lots of fun just sux waiting for other stuff before I can hook it up. Now im bored again yay. |
|
Bronze Member Username: Philly306Post Number: 89 Registered: Apr-07 | WOWOWOWOW thats crazy |
|
Silver Member Username: LowdoseSt. Louis, Mo. USA Post Number: 196 Registered: Apr-05 | I can't let this slide down man. Till more peps have seen it Bumpppppppp! |
|
Gold Member Username: WingmanaliveA pic is worth 1000 posts!! Post Number: 8111 Registered: Jun-06 | Yeah I get a kick out of that vid lol. Was sh1t falling off the roof in the first vid or just off shelves? |
|
Silver Member Username: LowdoseSt. Louis, Mo. USA Post Number: 198 Registered: Apr-05 | Man Paul there was crap falling of the ceilings off the walls in the house and I had a phone and a peice of wire fall off the trash cans outside the garage. If you watch it close you can see it falling in the background. |
|
Silver Member Username: Andrew571Stillwater/Edmond, Oklahoma USA Post Number: 948 Registered: Oct-05 | hahaha nice vids, also nice recone job - decently clean where in STL? |
|
Gold Member Username: WingmanaliveA pic is worth 1000 posts!! Post Number: 8113 Registered: Jun-06 | Haha. Nothing like a little domestic audio mayhem.  |
|
Silver Member Username: LowdoseSt. Louis, Mo. USA Post Number: 200 Registered: Apr-05 | Well Im bout 5 minutes from downtown. Put it this way I can see the Arch from my backyard. |
|
Silver Member Username: Andrew571Stillwater/Edmond, Oklahoma USA Post Number: 951 Registered: Oct-05 | im from kirkwood, 314 holluhhhhh lol |
|
Silver Member Username: LowdoseSt. Louis, Mo. USA Post Number: 203 Registered: Apr-05 | HA SWEET! |
|
Gold Member Username: Safe_crackerChicago, IL US Post Number: 2962 Registered: Jan-06 | "Please tell me you taped up the gap b4 you ground the glue off.... " Now Marshall, if you take the pic, zoom in you can clearly see that there is no towel in that gap, lol. He probably didn't even know what gap you were talking about (checking ho's walking down street for propper gapping ) when you mentioned it, lmfao.... Polo.. |
|
Silver Member Username: LowdoseSt. Louis, Mo. USA Post Number: 205 Registered: Apr-05 | Polo You a trip bro and yes I did infact use a tore t-shirt and slide it in the gap. On a DD motor there is a lip inside that widens out in was snug it there and you can't see from the pic. Thats why he probably said that. Love the ho bit though ha! |
|
Silver Member Username: Big_edge_headMilwaukee, Wisconsin USA Post Number: 234 Registered: Mar-07 | that sh!t was craaaaazy |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics