600w JBL Sub (what amp should i get???)

 

New member
Username: Roob

Post Number: 1
Registered: May-07
basically i got this sub its 600w peak so im not sure of the RMS prob 150-250

what kind of amp shpuld i get as all the jargo that goes with them is confuzzing!!! i also have some 280w JBC 6x9's and would mind linking them up?
 

New member
Username: Roob

Post Number: 2
Registered: May-07
should an amp match the peak or RMS?

wot the hell is an ohm????
 

Gold Member
Username: 420alldaylong

Post Number: 1818
Registered: Sep-06
http://www.bcae1.com/
 

Gold Member
Username: Nd4spd18

Southeast PA

Post Number: 2846
Registered: Jul-06
" should an amp match the peak or RMS? "

RMS


" wot the hell is an ohm???? "

http://www.bcae1.com/ohm.htm

You asked . To sum it up the ohm load of the speaker(s) has to match what the amplifier is stable at.


Now we need to know the coils are on the sub, single (SVC) or dual (DVC) and what ohms to find an amplifier. And you also want to connect the 6x9s to the amp?
 

New member
Username: Roob

Post Number: 4
Registered: May-07
yea if possible i would mind linking the speakers so theres less distortion at top end, recomendation on amp specs. limited budget
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us