How do you wire a sub into the box

 

New member
Username: Bondo101

Torrington, Wyoming United States

Post Number: 1
Registered: Mar-07
I just got 2 audiobahns and i got kinda confused when it came to wiring them into the box because there are 2(+) terminals and 2(-) terminals on either side of the sub on the back (so all together there are 4(+) terminals and 4(-)terminals on one subs. I didnt know if i should just connect one positive terminal to the positive terminal on the box and just do the same with the negative. I have a two channel amp to push both of them. Could some one help me out?
 

Gold Member
Username: Blainew

Post Number: 2235
Registered: Nov-05
tell me which exact subs u have, and which exact amp... and ill tell you how to wire it!
 

New member
Username: Bondo101

Torrington, Wyoming United States

Post Number: 2
Registered: Mar-07
Ok I have two aw1251t adiobahnns 800 watt max like these (http://www.cardomain.com/item/ABNAW1251T)

and sadly a pyle 1800w two channel like this
(http://cardiscountstereos.com/catalog%20page.asp?Product+%23=PLA2210)
 

Gold Member
Username: Blainew

Post Number: 2236
Registered: Nov-05
wire them like this, you are going to want to wire each individual sub to 2 ohms. and then connect the resulting wires to the terminals on your sub box

wire each sub like option 1

http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qt y=1&woofer_imp=4

then you will have to wire each terminal to each channel of your sub box
 

New member
Username: Bondo101

Torrington, Wyoming United States

Post Number: 3
Registered: Mar-07
Alright thanks a lot. Ill go do that
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us