1st electrical upgade????????

 

Silver Member
Username: 40hz

N.C. Usa

Post Number: 183
Registered: Dec-06
alternator or battery.i'm not lookin to do comps just want to ohm my amp down for max spl when i feel like bumpin hard.did that today,ohmed down to 1ohm about 1200-1400 watts,bumped hard but batt. voltage droppin with the bass.battery is atleast 5 yrs old so it needs to go anyway.will a new battery help ALOT,or will i need an alt too?stock alt is 100 amps.thanks
 

Silver Member
Username: 40hz

N.C. Usa

Post Number: 185
Registered: Dec-06
o ya,the volts droppin was at idle,give a little gas and it was fine.
 

Gold Member
Username: Wolfman1966

WEST MONROE , LOUISIANA USA

Post Number: 2004
Registered: Jan-06
have you done the big 3 yet? that should be the 1st thing done.
 

Silver Member
Username: Nd4spd18

Southeast PA

Post Number: 770
Registered: Jul-06
HO alternator and big 3
 

Gold Member
Username: Extrmndor3

IF U HEAR ME... I GOT KING K...

Post Number: 4043
Registered: Feb-06
im runnign 2k rms wiht only 0 gauge big 3 and no dimming
 

Silver Member
Username: 40hz

N.C. Usa

Post Number: 186
Registered: Dec-06
big 3? thats the ground from batt to chassis,and what else?
 

Silver Member
Username: Nd4spd18

Southeast PA

Post Number: 772
Registered: Jul-06
Battery to chassis, engine block to chassis, and alternator to battery.
 

Silver Member
Username: 40hz

N.C. Usa

Post Number: 187
Registered: Dec-06
thanks M.S. and king rob.I'll do that AND get a new battery.sounds like i should be good to go after that.I also found big3 upgrade just now on the12volt.com
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us