|
New member Username: Rob1083Post Number: 2 Registered: Mar-07 | i was wondering if you hook up 2 subs each wired at 2 ohms to a mono amplifier, does the amp see a 2 or 4 ohm load? thanks. |
|
Gold Member Username: Van_manBoston South, MA Post Number: 2133 Registered: Mar-06 | http://www.crutchfieldadvisor.com/learningcenter/car/subwoofers_wiring.html?subs =2 |
|
New member Username: Rob1083Post Number: 3 Registered: Mar-07 | but what if i don't wire the subs together? |
|
Gold Member Username: Van_manBoston South, MA Post Number: 2134 Registered: Mar-06 | Its a mono amp. Mono Means One, One channel. What ever you wire em at the amp will see a single load, wether its 1,2,4,8 ohms. It all depends on what way you wire your subs. If both subs are wired to 2 ohms, that what the amp sees. |
|
Gold Member Username: James1115Use a simple... Post Number: 9352 Registered: Dec-04 | if you wire them up each to 2 ohms assuming they are dual 4 ohms subs. You wire them parallel to a 2 ohm load and then into the amp you will get a 1 ohm load. |