Silver Member Username: Kickerman
Post Number: 107
Registered: May-06
|
Posted on im looking for the hole in the firewall of a 2004 chevy impala. would any1 b able to tell me where it is or how i can get to it |
Gold Member Username: Tdeaton1021
Near Tampa,
Florida
USA
Post Number: 3901
Registered: Sep-04
|
Posted on either make a new one... or find where all your other wires go through. there is usually a rubber boot you can run your wire through. |
Gold Member Username: Blainew
Post Number: 2186
Registered: Nov-05
|
Posted on just take it to an audio shop,not circuitcity or bestbuy, and they will do it for like 10-15 bucks |
Silver Member Username: Nd4spd18
Southeast PA
Post Number: 700
Registered: Jul-06
|
Posted on Just drill a hole, and put in a gromet. Make sure you know where the drill bit will come out on the other side.
Why would you pay CC or BB 10 bucks to drill a hole? |
Gold Member Username: James1115
Use a simple...
Post Number: 9313
Registered: Dec-04
|
Posted on there should be a rubber grommet right on the drivers side about half way down. |