Wiring help

 

Silver Member
Username: Homegrowncam

Funky Town, TX United States

Post Number: 338
Registered: Jan-05
Alright so I have an Alpine 9856. I installed it myself last January. When I installed it I hooked up all the wires with electrical tape. Well 2 nights ago I was at a buddys house and he had a set of Inifinity 6.1s laying around that we decieded to install. Doing so we switched RCAs in the baack of the head and the electircal tape slipped off and wires were exposed. The head unit wouldnt turn on so I just put it all back and decided to work on it this morning. My thing is I have checked wires and made sure all are connected accordingly and connected them with those wire connectors where you slide the stripped wires in and then twist the cap. Now it still isnt turning on and I was wanting to know what to look for? ANy help at all is apreciated.
 

Gold Member
Username: Tjmutlow

Post Number: 3383
Registered: Sep-05
need to see if your getting power at the constant and switched wires, use a test light, or see if you blew the fuse in the fuse panel.
 

Silver Member
Username: Homegrowncam

Funky Town, TX United States

Post Number: 340
Registered: Jan-05
So i am not getting power from my power wire and no fuses are blown.
 

Gold Member
Username: Tjmutlow

Post Number: 3394
Registered: Sep-05
fuse cannstill be blown and not able to be seen, you really need a test light or something to test them, they should have power on 2 sides of the fuse.
 

Gold Member
Username: Tjmutlow

Post Number: 3395
Registered: Sep-05
or you have another fuse box under the hood
 

Silver Member
Username: Homegrowncam

Funky Town, TX United States

Post Number: 341
Registered: Jan-05
i checked the fuse box under the hood and all the same.
 

Gold Member
Username: Leew

XXXX!!WWWW, Yokosuka, ... YAKUDZA JAP...

Post Number: 1143
Registered: Jan-06
Cameron

if your car is Nissan Altima 1997,then could be this sh!t:
somehow you connected ACC wire to the RR (+) speaker,cause it's the same color,also +12 is the same color as LR (+) speaker!!! So, check this out:

Upload
-----------------------------------------
Upload
Check all connections with DMM or a light bulb
 

New member
Username: Smrts82

Post Number: 5
Registered: Dec-06
I need help finding a power source for a dvd player and 2 monitors in a 2004 suburban. I plan on leaving the factory stereo alone. Can someone help please?
 

Bronze Member
Username: King33

Post Number: 18
Registered: Nov-06
You probably otta start a new thread under a different toppic or you may not get any help.... I dont know anything about it.
 

Silver Member
Username: Homegrowncam

Funky Town, TX United States

Post Number: 342
Registered: Jan-05
no i onnected the powering right becuase i have a separate amp powering my speakers. the power is conected properly just not getting anything from it.
 

New member
Username: Swampthang

Post Number: 1
Registered: Dec-06
i need a wireing diagram or the color code for a 1989 f150 the previous owner cut up the wireing harness for the radio so i need to know what wire gose where

thanks
jason
 

Silver Member
Username: Homegrowncam

Funky Town, TX United States

Post Number: 344
Registered: Jan-05
bump
 

Silver Member
Username: Homegrowncam

Funky Town, TX United States

Post Number: 356
Registered: Jan-05
any other suggestion. before i knew my power wire coming off the harness had power because i would touch it to my anntenna wire and teh antenna would rise but now it does nothing.
 

Gold Member
Username: Tjmutlow

Post Number: 3411
Registered: Sep-05
did you use a test light on all the fuses, it really sounds like a fuse issue, due to the switched power is not working
 

Silver Member
Username: Homegrowncam

Funky Town, TX United States

Post Number: 366
Registered: Jan-05
i started a new thread about it

https://www.ecoustics.com/electronics/forum/car-audio/306771.html
 

Silver Member
Username: Homegrowncam

Funky Town, TX United States

Post Number: 369
Registered: Jan-05
anybody? its lonely without a radio.
 

Silver Member
Username: Arande2

400dB could probably d..., 4000 isnt ev... 100,000dB FU...

Post Number: 384
Registered: Dec-06
Agh I know the feeling. I wouldn't know though.
 

New member
Username: Billfl1

Post Number: 1
Registered: Mar-07
Good afternoon!!! can anyone tell me how to obtain a wiring diagram for a 2000 ford windstar LX. I'm trying to install an after market radio. tks..
 

New member
Username: Foodlion01

Post Number: 1
Registered: Mar-07
i need a wiring diagram fo a 1990 blazer 1500 for a durabrand cd player
 

New member
Username: Strandman

Carlsbad, Ca Us

Post Number: 1
Registered: Mar-07
i need the radio wiring color codes for a 1989 ford clubwagon. please help!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us