|
Silver Member Username: Mr_keboAlbertville, Al USA Post Number: 704 Registered: Nov-04 | Well ive got my car all tore apart running my power wiring. Im doing the big 3 under the hood. Can i run my power and ground wire from the alt to the back to my Kinetik2400 battery? Then from the battery run power and ground to my distro blocks? Im goin to be running 2 eD NINe.1 amps strapped. Whats the best bet for wiring all this and getting the best power.what size wire should i run from the distro blocks to the amps? |
|
Gold Member Username: SouthernrebelMonroe, Louisiana DD 9515d~~]... Post Number: 3676 Registered: Mar-04 | run 1/0 from alt to front batt. then 1/0 power and ground from front batt to back batt. then distro to amps. |
|
Gold Member Username: SouthernrebelMonroe, Louisiana DD 9515d~~]... Post Number: 3677 Registered: Mar-04 | 1/0 everywhere you can put it. http://www.knukonceptz.com/productMaster.cfm?category=KLM%20Kable 1/0ga for $1.75/ft...that is as cheap as you will ever find 1/0. |
|
Silver Member Username: Mr_keboAlbertville, Al USA Post Number: 705 Registered: Nov-04 | positive and negative front batt to pos and neg on the back batt? |
|
Silver Member Username: RenegadesrunLafayette, IN US Post Number: 476 Registered: Oct-04 | Yes. Ground front battery to frame and rear battery to the same frame rail. That wire is copper clad aluminum. Cheaper, much lighter, even more flexible, and the properties are close enough that it wont matter. |
|
Silver Member Username: Mr_keboAlbertville, Al USA Post Number: 706 Registered: Nov-04 | ok Cool. I will be orderng some KINETIK batts from you very soon. |
|
Bronze Member Username: JblanfordPost Number: 67 Registered: Oct-06 | Kebo what are you strapping those amps to ? I'm strapping two to an 18" btl |
|
Silver Member Username: Mr_keboAlbertville, Al USA Post Number: 707 Registered: Nov-04 | Im doing 1 15" BTL. I dont have the room for the 18" or i would :D |