|
Silver Member Username: PikeshToronto, ONtario Canada Post Number: 291 Registered: Jun-05 | As some of you know i had problem wiht my amp for those who are reading it first time... My system just stopped working outta nowhere... All connections are checked > Fuses(including inline) are checked... Tested the wires to current flow... Power - Not sure.. remote - YES Ground - YES These are the 2 videos i recorded with my phone.. First one is to show see that remote wire is working and has current and second is for ground NOTE: In the second video, you will see that i connected the tester to remote wire and then i tapped it on to power cable...You will see that the light on tester goes on and dims away AS the light on amp turns on and off and again... This also happens when i tap the tester on Power cable, fuses and speaker wires :S Thanks and please help me Video one: remote wire check http://www.filelodge.com/files/room45/1305162/remote%20wire%20check.avi Video 2: http://www.filelodge.com/files/room45/1305162/powercable%20check%3D%28.avi |
|
Silver Member Username: PikeshToronto, ONtario Canada Post Number: 292 Registered: Jun-05 | Sorry but i just noticed that the video software i converted the videos from only does 15 seconds so please bear with me and you will notice in video 2 that the light goes on but then it goes away on both tester on amp u prolly wont see it but ya.. Thanks again |
|
Silver Member Username: PikeshToronto, ONtario Canada Post Number: 293 Registered: Jun-05 | BUMP!!!!! |