okay i was reinstalling my amp and i forgot to unplug the neg terminal on the batt and i connected the ground but when i was connecting positive it sparked so i disconnected the neg on the batt and continued to install i finished and now the amp wont turn on i checked fuses etc but evrything seems fine
Resonant Engineering...,
Fort Worth...
Fort Worth, ...
Post Number: 1425 Registered: Nov-05
Posted on
Did you check the inline fused as well as the inline fuse? Does your head unit still come on? If not check the fuse for that.. Is the REM wire connected to a proper source? Ground and positive wires have good connections?
make sure power and ground are correct.use a test light and make sure you have power at the amp both on the main power and the remote(radio on), if you have power on both lines, you prob blew the power supply on amp