|
Bronze Member Username: Icecreamman5687Post Number: 60 Registered: May-06 | soo i hooked up my amp and subs tonight.a hifonic brutus bxi1606D to 2 alpine type r's and all i get is just a lil bit of bass like not even enough to move the subs at all u can just lightly hear it...does anyone know of anything to do or wat it could be |
|
Silver Member Username: BernymacRialto, CA United States Post Number: 681 Registered: Sep-04 | did you set your LPF? if its on HPF that could be a reason. |
|
Silver Member Username: GrebnereonPost Number: 385 Registered: Mar-06 | just check all of your wiring. subs may be wired wrong. bad grounds, etc. whats the gain set on? |
|
Bronze Member Username: Icecreamman5687Post Number: 63 Registered: May-06 | i didnt see the switch for the LPF or HPF |
|
Silver Member Username: BernymacRialto, CA United States Post Number: 682 Registered: Sep-04 | what about the tuning on your Headunit, did you check that as well. |
|
Bronze Member Username: Icecreamman5687Post Number: 64 Registered: May-06 | i tried the gain all over im still new at everything not good wit tunning them right o anything so i tried changing the gain around and nothin |
|
Bronze Member Username: Icecreamman5687Post Number: 65 Registered: May-06 | yah i have been tuning the headunit as well and i cant find anything im gonna check all the wires again |
|
Gold Member Username: StnorrisNot yet decided, IA US Post Number: 1513 Registered: Apr-06 | the subs are probably wired wrong. |
|
Silver Member Username: GrebnereonPost Number: 387 Registered: Mar-06 | thats what im thinkin. you sure you wired them correctly? |
|
Silver Member Username: BernymacRialto, CA United States Post Number: 683 Registered: Sep-04 | Did you connect the rcas to the subout on your headunit? |
|
Bronze Member Username: Icecreamman5687Post Number: 66 Registered: May-06 | that wat i was thinkin too... on the amp there is 2 sets of outputs for speaker wire do i need to use both cause i was told to use only one to wire it one ohm |
|
Silver Member Username: Naledge503Portland, Oregon U.S. Post Number: 433 Registered: Jun-06 | my brother was having the same problem a couple weeks ago. he had his positive wire running to the negative terminal and negative wire running to the positive terminal, on one sub, inside the box. |
|
Bronze Member Username: Icecreamman5687Post Number: 68 Registered: May-06 | yah they been connected since i put my first amp in with these subs |
|
Silver Member Username: GrebnereonPost Number: 388 Registered: Mar-06 | haha...yes plug in both rcas...well i mean use i set (which consisted of 2) a white and a red also the RCAs have nothing to do with you ohm load |
|
Bronze Member Username: Icecreamman5687Post Number: 69 Registered: May-06 | soo run + out of amp to + on sub1 the out of +1 to + on sub2 take the + on sub1 one and go to + on the second vc of sub 1 and same wit sub2 and same wit - on sub1 and 2 |
|
Silver Member Username: GrebnereonPost Number: 389 Registered: Mar-06 | sorry...nevermind...diffinatley misunderstood that post.my bad |
|
Silver Member Username: GrebnereonPost Number: 390 Registered: Mar-06 | http://www.the12volt.com/caraudio/woofer_configurations.asp go here, put in the VC configurations and what ohm load you want. (1) |