700-900 watts at 2 ohms under $300?

 

Silver Member
Username: Hondarider

Glidden, Iowa U.S.

Post Number: 223
Registered: Sep-05
I am looking for an amp to power my 2 10" assassins and i dont want to spend more than $300 so far all i have found is the kicker zx750.1. Is there anything better or a little cheaper?
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 8371
Registered: Jul-05
alpine MRD-M1005 , around $300 as well - have u checked ebay ?

RMS Power (at 12V,20Hz-200Hz)
* Per channel into 2 ohms : 700W x 1
* Per channel into 4 ohms : 500W x 1

RMS Power (at 14.4V,20Hz-200Hz)
* Per channel into 2 ohms : 1000W x 1 (1% THD)
 

Silver Member
Username: Ctmike

Ct.

Post Number: 966
Registered: Feb-06
or 2 of these

http://cgi.ebay.com/PHOENIX-GOLD-X400-1-400-WATT-1-CHANNEL-MONOBLOCK-AMP_W0QQite mZ140004903333QQihZ004QQcategoryZ18797QQrdZ1QQcmdZViewItem
 

Silver Member
Username: Johnny619

San Diego, CA

Post Number: 166
Registered: Dec-05
JBL 1200.1
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 1139
Registered: Dec-05
audiobahn a8000t
 

Gold Member
Username: Redliner

Wilmington, Ma

Post Number: 2120
Registered: Jun-05
lok into a mtx thunder 942 i have one and love it puts out what its suppose to also and cheap
 

Bronze Member
Username: New_at_this

Post Number: 47
Registered: Apr-06
can assassin's handle that much?
 

Gold Member
Username: Redliner

Wilmington, Ma

Post Number: 2126
Registered: Jun-05
you just turn down the gain a little it will be fine and keep the bass boost down a lot
 

Gold Member
Username: Tjmutlow

Post Number: 2570
Registered: Sep-05
what voice coil config are those?
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 1144
Registered: Dec-05
assassins are 4 ohm SVC
 

Bronze Member
Username: Maxsq

Post Number: 16
Registered: Jul-06
First why do you need that much power? I have done this for the past 19 years and have found that power is not all it's cracked up to be. We used to used less that 100 watts to run a whole system. As a matter of fact I competed with 2 25 watt PPI amps and never had any problems getting loud. But, I have a JL 300/2 that will run them very well. If you are interested, let me know and I will give you a killer deal on it. I ran 15 off one and it SLAMED pretty hard. 2 10's no problem!
 

Gold Member
Username: Dustin3

Tigard, OR U.S.

Post Number: 2474
Registered: Oct-05
2 25 watt amps? sorry, but you cant compete with that. in order to compete (in a good comp) you need 1000 + and you need to be a hell of a box builder
 

Gold Member
Username: Dustin3

Tigard, OR U.S.

Post Number: 2475
Registered: Oct-05
the audiobahn a8000t would be great tho
 

Silver Member
Username: Frkkevin

Denton, Texas US

Post Number: 260
Registered: Nov-05
I've got a vega exl 1000d that does 1000 x 1 @ 2ohm on 12volts.. I'm asking 300. had two but i already sold one. im sure you can get that amp cheaper though but the audio shop down here will pay me 300.. only reason im selling it is because i need one that does 1000 @ 1ohm. only 2 weeks old ran at half power
 

Silver Member
Username: Frkkevin

Denton, Texas US

Post Number: 265
Registered: Nov-05
still looking?
 

Silver Member
Username: Killer44

Ontario Canada

Post Number: 578
Registered: Dec-04
get the audiobahn its great a great budget amp i got the A8002T running my cvr's and the thing really pushes those subs, it gets a little hot when its played for long periods of time, but the cooling fan does its job and ive never had it go into protection...(knock on wood lol)
 

Silver Member
Username: Killswitchjd

Post Number: 247
Registered: Apr-06
killer, i have had mine go into protection, and it was really hot... I probably pushed it too hard but it was loud as sh*t
 

Silver Member
Username: Stnorris

Eldridge, IA US

Post Number: 836
Registered: Apr-06
hondarider...just get the a8000t or the a8000v.

killer the a8002t wont work. i think that amp does 800 x 1 @ 4 ohms. and 2 svc 4 ohms, is going to wire to a 2 ohm load. so he will need the 1 channel abahn.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us