Help with my subs

 

Silver Member
Username: Eseesai

Post Number: 145
Registered: Mar-06
ok so my 2 subs are a SVC 4ohms but the thing i dont know how to wire them to get a 2 ohm load i tried looking on the Crutchfield Advisor and i couldnt find the way my subs are set up cause it has two positives and two negetivs on each side and im going to us and audiobahn A8000T to power them they are 250rms each i need help please
 

Silver Member
Username: Panocha

Post Number: 201
Registered: Jun-05
if they have two negatives and posotives they are DVC 4ohms
 

Gold Member
Username: Bestmankind

Los Angeles, CA USA

Post Number: 4069
Registered: Oct-05
http://www.the12volt.com/caraudio/boxcalcs.asp
 

Silver Member
Username: Hootz

Saskatoon, Saskatchewan Canada

Post Number: 186
Registered: Oct-05
You just wire them parallel. pos and neg on the amp to each pos and neg on the subs.
 

Silver Member
Username: Eseesai

Post Number: 146
Registered: Mar-06
no they are SVC cause even the web site says they are SVC's and its confusing me
 

Silver Member
Username: Eseesai

Post Number: 147
Registered: Mar-06
oh if it helps they are MA Audio's, its a starter system heres the link:

http://maaudio.com/productcatalog.cfm?class=47493

its the Model: MA100QS the first one on the site
 

Silver Member
Username: Eseesai

Post Number: 149
Registered: Mar-06
so u guys know how to wire them?
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 8119
Registered: Jul-05
http://www.the12volt.com/caraudio/woofer_configurations.asp

enter 2 4ohms svc here & wire it @ 2ohms ......
 

Silver Member
Username: Eseesai

Post Number: 150
Registered: Mar-06
im confused cause the have 1positive and 1negetive on one side and on the other side it the same thats the only reason im asking cause its confusing the sh.it out of me
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 8120
Registered: Jul-05
all mono amps have that its just an extra terminal to connect , internally in ur mono amp those 2= & 2- are conected together so its no worries if u use the 1st +- or 2nd +- terminal cause u will have the same results ....
 

Silver Member
Username: Eseesai

Post Number: 151
Registered: Mar-06
oh ok so just wire them like the link says and the amp is a two channel bridgeable it does 400wrms at two channels in 2 ohms and 200wrms at 4ohms in 2channels and 800wrms bridged at 4ohms
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 8121
Registered: Jul-05
ur amp is a MONO BLOCK meaning 1 channel ...
 

Silver Member
Username: Eseesai

Post Number: 153
Registered: Mar-06
my bad i thought i had gotten the 2channel cause i was also looking at that one but u are right i did buy the mono block so into 4ohms its putting out about 400wrms and into 2ohms its putting out 800wrms so it is compatible with a 2ohms load and it'll power them to their potential

and is this amp able to power some kicker cvr's good or would i need another stronger amp cause i might upgrade my system later on?
 

Silver Member
Username: Eseesai

Post Number: 154
Registered: Mar-06
so would it give them enough power or no?
 

Silver Member
Username: Adddisorder

West palm, Florida

Post Number: 360
Registered: Jan-06
it would be good for cvrs
 

Silver Member
Username: Eseesai

Post Number: 156
Registered: Mar-06
oh ok cause i'm going to upgrade like in 3weeks and these are for right know
 

Silver Member
Username: Adddisorder

West palm, Florida

Post Number: 364
Registered: Jan-06
look in the bragging section nate so has that set up i belive
 

Gold Member
Username: Pelona

Perris, California USA

Post Number: 1571
Registered: Dec-05
pinche pendejo i told u they were dual voice coil
 

Silver Member
Username: Nemen

Post Number: 897
Registered: Dec-05
if they have two posotives and two negatives theyre definately dvc they probably sent you he wrong box or something lol.
 

Gold Member
Username: Pelona

Perris, California USA

Post Number: 1572
Registered: Dec-05
no they are dual voice coil. i went to his house today n i checked them n they are. he thinks theyr single cuz they both like go in the same direction but i tell him hes dumb and he doesnt know anything
 

Gold Member
Username: Pelona

Perris, California USA

Post Number: 1573
Registered: Dec-05
oh n hes my nephew btw
 

Silver Member
Username: Eseesai

Post Number: 158
Registered: Mar-06
Fu.ck u pin.che pelona me la mamas and shut the f.uck it aint my fault pu.ta and next time i c u ima pull ur ear like ur mom does in front of the chosen few homies and make u look like a pus.sy again u member what happened yesterday lo mismo and if u were my uncle u wouldnt cry when i hit u bit.ch
 

Gold Member
Username: Pelona

Perris, California USA

Post Number: 1576
Registered: Dec-05
this foo just made that sh!t up too make himself look good
 

Silver Member
Username: Eseesai

Post Number: 159
Registered: Mar-06
oh ya guey well c tomorrow if u car windows arent broken pendeja pelona watch ill do what nike says "JUST DO IT" BIT.CH
 

Gold Member
Username: Pelona

Perris, California USA

Post Number: 1577
Registered: Dec-05
this foo is always touching me everytime i go to his house
 

Gold Member
Username: Pelona

Perris, California USA

Post Number: 1578
Registered: Dec-05
seriosly i think hes g@y
 

Silver Member
Username: Eseesai

Post Number: 160
Registered: Mar-06
bit.ch u ga.y why u say i touch u, u 16 year old man that fu.cks around with 7graders and dont lie
 

Gold Member
Username: Pelona

Perris, California USA

Post Number: 1579
Registered: Dec-05
wut the fu.ck dawg quit making all this sh1t up
 

Silver Member
Username: Usask8er1

Appleton, Wisconsin USA

Post Number: 251
Registered: Jun-05
Ahhh the love in the family.
 

Silver Member
Username: Eseesai

Post Number: 161
Registered: Mar-06
haha ok i admit it i lied about the 7th grader thing but u cant blame me for nothing foo and why u hattin im still learing foo im new at this so wouldnt this be the site for people that want to learn pendejo huh?
 

Silver Member
Username: Johnfiac

Il USA

Post Number: 157
Registered: Mar-06
Hahah good point, gotta love the family fued..hahaha so what are they DVC 4ohm or DVC 2ohm? did u ever get them connected up. It wouldnt hurt to get a multimeter 2 check your ohm load after you wire it up just to be safe if your not to sure.
 

Silver Member
Username: Eseesai

Post Number: 162
Registered: Mar-06
where would i get a multimeter?
 

Silver Member
Username: Stnorris

Eldridge, IA US

Post Number: 397
Registered: Apr-06
lol, if the subs are dual 4 ohms, you are going to need a new amp. unless its 1 ohms stable.

i cant get the link to work,
 

Silver Member
Username: Eseesai

Post Number: 163
Registered: Mar-06
the subs are overrated according to some people like my uncle pelon he said they really pushing out about 200 rms and i can wire the subs to a 4ohms load and get about 400wrms
 

Bronze Member
Username: Cbrown

Post Number: 15
Registered: Jun-06
yeah fo sho
 

Gold Member
Username: Pelona

Perris, California USA

Post Number: 1580
Registered: Dec-05
i told you. bi*ch a*s. ur always wrong n im always right
 

Silver Member
Username: Eseesai

Post Number: 164
Registered: Mar-06
FU.CK U MALES.TER....haha now u know im right pendeja u know ill kick ur @ss all around Perris
 

Gold Member
Username: Pelona

Perris, California USA

Post Number: 1582
Registered: Dec-05
b1tch u know u made dat sh1t up
 

Gold Member
Username: Pelona

Perris, California USA

Post Number: 1584
Registered: Dec-05
y me mamas la verga
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us