Bronze Member
Username: Dandandan Brisbane,
Queensland
Australia
Post Number: 66 Registered: May-06
Posted on
Sunday, June 11, 2006 - 10:31 GMT can u get a home amp and use power jumpers to conect to the 2 pins and then conect it to batery??
Bronze Member
Username: Dandandan Brisbane,
Queensland
Australia
Post Number: 68 Registered: May-06
Posted on
Sunday, June 11, 2006 - 11:12 GMT conect to the car battery i mean
Gold Member
Username: 54danny54 Betsy layne,
Kentucky..GO...
USA duh
Post Number: 2527 Registered: Nov-04
Posted on
Sunday, June 11, 2006 - 12:41 GMT that made no sense at all
Bronze Member
Username: Dandandan Brisbane,
Queensland
Australia
Post Number: 76 Registered: May-06
Posted on
Sunday, June 11, 2006 - 23:04 GMT like you get a home amp where it plugs into the wall with the 2 pins can u put power jumpers from thr 2 pins to the battery ??
New member
Username: Donger Fernandina Beach,
FL
USA
Post Number: 1 Registered: Jun-06
Posted on
Sunday, June 11, 2006 - 23:51 GMT No...Your Home amp uses 110 volts, while your car battery is 12 volts...you would need a power inverter...But I would suggest that you just buy a car audio amplifier.
Silver Member
Username: Jkidder Spring hill,
Florida
Usa
Post Number: 166 Registered: Nov-05
Posted on
Monday, June 12, 2006 - 02:15 GMT lol yes dont try that
Silver Member
Username: Sw9152 Michigan
Post Number: 772 Registered: Feb-06
Posted on
Monday, June 12, 2006 - 02:29 GMT you could drop like $120 on a massive DC to AC power inverter...
Silver Member
Username: Sw9152 Michigan
Post Number: 773 Registered: Feb-06
Posted on
Monday, June 12, 2006 - 02:31 GMT or a audiobahn a8000t which will get you 800wrms @ 2 ohms for around the same price.
Bronze Member
Username: Dandandan Brisbane,
Queensland
Australia
Post Number: 77 Registered: May-06
Posted on
Monday, June 12, 2006 - 02:58 GMT yer and do u have to power an amp with the cd player or can u just hav it conected to the battery alone without powerin it up from the receaver
Silver Member
Username: Usask8er1 Appleton,
Wisconsin
USA
Post Number: 221 Registered: Jun-05
Posted on
Monday, June 12, 2006 - 03:58 GMT First off the amp is only being powered by the battery. But the amp will need to be connected to the reciever through RCA cables and a remote. Otherwise no signal will go to amp and nothing will happen at all.