My SetUp Not As Pretty But...

S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 333 Registered: Feb-06	Posted on Friday, May 12, 2006 - 22:50 GMT
Shaine Silver Member Username: Lexuscoop Pheonix, Arizona USA Post Number: 112 Registered: May-06	Posted on Friday, May 12, 2006 - 22:53 GMT why arre you running 2 powers? looks very good though, who cares about pretty when preformance is what matters
WrEaK HaVoC(.'~DAYE£?~'.) Gold Member Username: 54danny54 Betsy layne, Kentucky..GO... USA duh Post Number: 2323 Registered: Nov-04	Posted on Friday, May 12, 2006 - 22:56 GMT ha ha yea....man that sum thick cable...what gauge is it?
drivingreckless Silver Member Username: Drivingreckless Near tampa, Florida United state... Post Number: 343 Registered: Apr-06	Posted on Friday, May 12, 2006 - 22:56 GMT WUTS UR BOX TUNED TO??? DO U HAE A HO ALT. ALSO.........HOW LOUD IS IT !!!!!!!!!!?
Archie Clark Silver Member Username: Shman Grandville, Michigan United States Post Number: 171 Registered: Mar-06	Posted on Friday, May 12, 2006 - 22:58 GMT lol thats ridiculous
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 334 Registered: Feb-06	Posted on Friday, May 12, 2006 - 23:13 GMT its all 0/1 stinger wire box is tuned @ 26hz an 2 power wires cause it got 2 power supplys an stock alt. the volts dont go past 13volts an its pretty go0d car anit on the road yet so when it is ill tell u an it still anit as loud as my friends 2 cvrs that i made loud lol an all gains are 25/100 or a lil more than 25/100
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 335 Registered: Feb-06	Posted on Friday, May 12, 2006 - 23:15 GMT o an its @ 2500w@ 1ohm
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 336 Registered: Feb-06	Posted on Friday, May 12, 2006 - 23:16 GMT Gota ? can i run the amp @ 1/2 ohm for daily drive cause i wanna try an get the other 10 from my friend an put 2 in there lol
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 337 Registered: Feb-06	Posted on Friday, May 12, 2006 - 23:50 GMT ok guyz how this sound that box up top i tolk it out its in the hatch now i got a diffrent box 2.6cuft tuned @ 32hz wow sounds how better but that box up top iam rebuildin it takin all port out tuneing it 2 say 32hz or 30hz both 10s in it thats 2.6cuft tuned @ 32 or 30hz will it sound go0d an also can i run the amp @ 1/2 ohm?
Archie Clark Silver Member Username: Shman Grandville, Michigan United States Post Number: 180 Registered: Mar-06	Posted on Friday, May 12, 2006 - 23:54 GMT if the amp is 1/2 ohm stable, and you upgrade your alt. you should be able to...
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 339 Registered: Feb-06	Posted on Saturday, May 13, 2006 - 00:10 GMT rebuildin this box an the carpet box i was salin b4 that i made it sounds way better so iam goin 2 10s in the same box what should i do run the amp @ 1/2 ohm or 2ohms?
Archie Clark Silver Member Username: Shman Grandville, Michigan United States Post Number: 185 Registered: Mar-06	Posted on Saturday, May 13, 2006 - 00:17 GMT is your amp 1/2 ohm stable?
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 340 Registered: Feb-06	Posted on Saturday, May 13, 2006 - 00:21 GMT 1ohm but ppl do .35 ohms or 1/2 ohms
Archie Clark Silver Member Username: Shman Grandville, Michigan United States Post Number: 187 Registered: Mar-06	Posted on Saturday, May 13, 2006 - 00:23 GMT idk... you could hook it up 1/2 ohm for showing off, then 2 ohm for dd....
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 341 Registered: Feb-06	Posted on Saturday, May 13, 2006 - 01:23 GMT sounds go0d lol heres the box as of now with port @ 33hz
Archie Clark Silver Member Username: Shman Grandville, Michigan United States Post Number: 200 Registered: Mar-06	Posted on Saturday, May 13, 2006 - 01:25 GMT that looks a lot more than 2.6ft^3...
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 343 Registered: Feb-06	Posted on Saturday, May 13, 2006 - 01:44 GMT 13h x 25.5w x 17.75d should i use a divider in the middle or no?
danny Silver Member Username: Panocha Post Number: 128 Registered: Jun-05	Posted on Saturday, May 13, 2006 - 02:06 GMT cool set up man.
Archie Clark Silver Member Username: Shman Grandville, Michigan United States Post Number: 212 Registered: Mar-06	Posted on Saturday, May 13, 2006 - 02:13 GMT idk how you would use a divider....... youll probably be fine without a divider.... im nowhere near what youd call a box expert tho so im not quite sure how having 2 subs in one section would affect the sound.....
Billy Franz Bronze Member Username: Snopro4ever Post Number: 14 Registered: Apr-06	Posted on Saturday, May 13, 2006 - 02:15 GMT how exactly do you port a box?? is it a piece that is inserted or is it just a hole cut? im noob at vented boxes
Archie Clark Silver Member Username: Shman Grandville, Michigan United States Post Number: 216 Registered: Mar-06	Posted on Saturday, May 13, 2006 - 02:18 GMT you need to build a box to be ported from the beginning.... i wouldnt just cut a hole in a sealed box,LOL.... maybe if it was already to specs for a pvc port.....
/\|/E/\/\E/\|/ Silver Member Username: Nemen Post Number: 794 Registered: Dec-05	Posted on Saturday, May 13, 2006 - 02:47 GMT nice setup you just need to carpet the box but it looks good.
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 344 Registered: Feb-06	Posted on Saturday, May 13, 2006 - 04:43 GMT i go threw made boxes b4 i choose 1 lol
\|\/\|aTT \|F Silver Member Username: Matt12490 Benicia, California USA Post Number: 813 Registered: May-05	Posted on Saturday, May 13, 2006 - 04:56 GMT how come you put caulking all on the outside??
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 345 Registered: Feb-06	Posted on Saturday, May 13, 2006 - 05:32 GMT double seald no air leaks
\|\/\|aTT \|F Silver Member Username: Matt12490 Benicia, California USA Post Number: 817 Registered: May-05	Posted on Saturday, May 13, 2006 - 05:38 GMT im pretty sure it would be fine just doing it on the inside. im not tryna diss your boxes i think they are great except it doesnt look that pretty with the caulk on the outside, but if you cover the box it would nice ooh and how long is the port on that box?
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 346 Registered: Feb-06	Posted on Saturday, May 13, 2006 - 06:40 GMT ya there r ugly but once u cover it its pretty like the 1 thats carpet up in the 1 pic that i did an the port is i think 3w 11.5h an 28L
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 347 Registered: Feb-06	Posted on Saturday, May 13, 2006 - 06:43 GMT iam goni 2 b runnin the subs @ 1,700Wrms @ 2ohms under powerin a lil bit but guess it will b ok dont wanna lose 2 much volts an fri my amp @ .5 ohms
Astrosafari Silver Member Username: Astrosafari Delhi, Ontario Canada Post Number: 373 Registered: Aug-05	Posted on Saturday, May 13, 2006 - 07:05 GMT it looks like your bridging that amp, with your RCA's on the amp when its bridged you dont want both going to just the right or just the left. put 1 rca on a left and one on a right, still colour coded though. then it will sound better
S.P.D Silver Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 348 Registered: Feb-06	Posted on Saturday, May 13, 2006 - 15:39 GMT i side is input an others ouput

« Previous Thread Next Thread »

My SetUp Not As Pretty But...

Main Forums

Forum Help

Follow Us