|
Silver Member Username: KingjamesOH USA Post Number: 130 Registered: Nov-05 | well i was thinkin of getting 3-4 12inch cvr's and was wondering if i could hook 3 subss to 1 amp and if so an amp suggestion, and if i cant amp/s suggestion |
|
Silver Member Username: LewassBoomfield Hills, MI USA Post Number: 718 Registered: Jan-06 | They will wire to weird ohm loads but with the right amp it would be fine. I assume those come in DVC 2 ohm models, which would be your best bet. 3 DVC 2 ohm subs can be wired to 1.33 ohm load. Just find an amp that does a little more power than you need at 1 ohm, so that it will do a bit less at 1.33 ohm. |
|
Silver Member Username: CtmikeCt. Post Number: 429 Registered: Feb-06 | yeah you can hook 3 subs to one amp. what version of subs you thinking about? that'll decide what amp to get. kicker 1200.1, nine.1, re 12.1 or any other amp that puts out at least 1200wrms, but just make sure it'll match with your subs vc. http://www.crutchfieldadvisor.com/learningcenter/car/subwoofers_wiring.html |
|
Silver Member Username: KingjamesOH USA Post Number: 132 Registered: Nov-05 | well which type ohm subs would be better? 2 or 4? and would a 1200wrms amp be enough to power 3 cvrs ? |
|
Silver Member Username: CtmikeCt. Post Number: 431 Registered: Feb-06 | dual 2 would probably be best. if you get a good 1200wrms amp it will. there each 400wrms subs, so split by three you see about 400wrms each, maybe a little less i think. just try to get a good amp thats underrated that'll put out more for each sub. |
|
Silver Member Username: KingjamesOH USA Post Number: 136 Registered: Nov-05 | suggestion? |
|
Silver Member Username: CtmikeCt. Post Number: 433 Registered: Feb-06 | i'd go with kicker 1200, re 12.1, or ed nine.1. |
|
Silver Member Username: KingjamesOH USA Post Number: 141 Registered: Nov-05 | so 3 dual ohm cvrs would hook up to one of those amps fine? and how would i wire it? |
|
Silver Member Username: KingjamesOH USA Post Number: 142 Registered: Nov-05 | dual 2 ohms* |